531X111PSHANG3电涡流传感器 PLC工控及自动化

531X111PSHANG3电涡流传感器 PLC工控及自动化

531X111PSHANG3电涡流传感器 PLC工控及自动化

产品描述

GE 端子板继电器卡 531X111PSHANG3 提供驱动器使用的 5 V 直流、15 V 直流和 24 V 直流电流。它还具有用于电机磁场电路的脉冲变压器。GE 终端板继电器卡 531X111PSHANG3 包括更换 3TB 组件。组件通过三根电线连接到电路板上的连接器。此外，该组件还附有带状电缆。该组件连接到驱动器中板柜内部的安装板上。

您必须考虑到这样一个事实，即所有带状电缆都要求您使用避免损坏的技术断开并重新连接它们。构成带状电缆的细线很容易损坏，并且可以与连接器断开连接。您必须通过拉动带状电缆来避免断开电缆。正确的技术是通过塑料连接器抓住带状电缆。用另一只手稳定组件并将连接器从组件中拉出。

五个螺钉将有缺陷的组件固定到安装板上。使用螺丝刀卸下螺钉并将螺钉放在安全的地方。如果任何螺钉掉入驱动器或卡在任何其他组件中，请停止该过程并取回螺钉。在重新启动期间为驱动器通电时，松动的螺钉可能会损坏驱动器。

531X111PSHANG3电涡流传感器 PLC工控及自动化

Product description

GE terminal board relay card 531X111PSHANG3 provides 5 V DC, 15 V DC and 24 V DC currents for driver use. It also has a pulse transformer for the motor's magnetic field circuit. GE terminal board relay card 531X111PSHANG3 includes replacing 3TB components. The components are connected by three wires to a connector on the circuit board. In addition, a ribbon cable is attached to the assembly. The component is connected to the mounting plate inside the drive center board cabinet.

You must take into account the fact that all ribbon cables require you to disconnect and reconnect them using techniques to avoid damage. The thin wires that make up the ribbon cable are easily damaged and can be disconnected from the connector. You must avoid disconnecting the cable by pulling the ribbon cable. The correct technique is to grab the ribbon cable through a plastic connector. Stabilize the assembly with your other hand and pull the connector out of the assembly.

Five screws secure the defective assembly to the mounting plate. Use a screwdriver to remove the screws and place them in a safe place. If any screws fall into the drive or get stuck in any other components, stop the process and retrieve the screws. When powering the drive during a restart, loose screws may damage the drive.