531X111PSHAKG2 GE电机现场控制

531X111PSHAKG2 GE电机现场控制

531X111PSHAKG2 GE电机现场控制

产品描述

GE 端子板继电器卡 531X111PSHAKG2 提供驱动器使用的 5 V 直流、15 V 直流和 24 V 直流电流。它还具有用于电机磁场电路的脉冲变压器。GE 终端板继电器卡 531X111PSHAKG2 包含多个跳线，您可以设置这些跳线以配置板以在驱动器中根据需要运行。跳线使您能够选择场电流反馈信号，并校准电枢电流反馈信号。您还可以选择抑制K2线圈电容器并调整失调电流隔离器。

最佳做法是检查原始板并注意跳线的位置。有些可能会根据您的要求配置电路板。其他人可能会被定位为来自工厂。无论哪种方式，重要的是要确保跳线在替换板中的位置与在原始板中的位置相同。替换板可能比原始板版本更高，您可能会发现跳线位于不同的位置。或者，您可能会发现原始板上的跳线在贴装板上不存在。

您可以确定更换板已在一系列更换方案中进行了测试，并且任何特殊的跳线要求都已记录在案，并可在更换板提供的信息中使用。此外，这些板是兼容的，旨在提供完全相同的功能。

531X111PSHAKG2 GE电机现场控制

Product description

GE terminal board relay card 531X111PSHAKG2 provides 5 V DC, 15 V DC, and 24 V DC currents for the driver. It also has a pulse transformer for the motor's magnetic field circuit. The GE terminal Board Relay card 531X111PSHAKG2 contains multiple jumpers that you can set to configure the board to run as needed in the drive. The jumper allows you to select the field current feedback signal and calibrate the armature current feedback signal. You can also choose to suppress the K2 coil capacitor and adjust the misaligned current isolator.

The best practice is to check the original board and note the location of the jumpers. Some may configure the board according to your requirements. Others may be identified as coming from the factory. Either way, it is important to make sure that the jumper is in the same position in the replacement board as it was in the original board. The replacement board may be taller than the original board version, and you may find the jumper in a different location. Alternatively, you may find that the jumper on the original board is not present on the mount board.

You can be sure that the replacement board has been tested in a range of replacement scenarios and that any special jumper requirements have been documented and can be used in the information provided by the replacement board. In addition, these boards are compatible and designed to provide exactly the same functionality.