531X111PSHAEG1 板可为主机驱动器提供电机现场控制和电源卡

531X111PSHAEG1 板可为主机驱动器提供电机现场控制和电源卡

531X111PSHAEG1 板可为主机驱动器提供电机现场控制和电源卡

产品描述

安装通用电气 531X111PSHAEG1 板可为主机驱动器提供电机现场控制和电源卡。制造该卡时，它是为531X系列替换驱动器卡开发的。GE系列中的旧驱动器都配备了将此卡安装在设备机柜内。安装主机驱动器所需的电源由此主板提供。该板的配置将其归类为 G1 板，其中 MOV 用于 AC 线路安装在板上而不是外部。

主机驱动器所需的电源配有 531X111PSHAEG1 电机现场控制和电源板。额定电压为 5 VDC、15 VDC 和 24 VDC 可以从此卡中获取和提取。此外，卡上的集成脉冲变压器提供为主机电机励磁电路供电所需的能量。许多板载选项为用户提供可配置的功能。Sy阀杆控制选项由板上的三个继电器执行。此外，该卡还包括五个跳线和三个电位计。跳线允许用户调整和修复反馈和电流信号。电流和电路反馈可以使用电位计进行校准。

在处理电路板之前，用户应检查提供的安装参数。 从我们的团队发货时，包括安装润滑剂和减静电腕带。531X111PSHAEG1卡只能由合格人员处理和安装。器件的数据表和手册中提供了完整的接线和安装指南。制造商通用电气最初为531X系列的所有成员提供技术支持。

531X111PSHAEG1 板可为主机驱动器提供电机现场控制和电源卡

Product description

A General Electric 531X111PSHAEG1 board is installed to provide motor field control and a power card for the host drive. When the card was manufactured, it was developed for replacement drive cards for the 531X series. Older drives in the GE series are equipped with this card installed in the device cabinet. The motherboard provides the power needed to install the host driver. The board's configuration classifies it as a G1 board, where MOV is used for AC line mounting on the board instead of outside.

The power required for the host driver is equipped with 531X111PSHAEG1 motor field control and power board. Rated voltages of 5 VDC, 15 VDC, and 24 VDC can be obtained and extracted from this card. In addition, the integrated pulse transformer on the card provides the energy needed to power the main motor excitation circuit. Many onboard options provide users with configurable features. Sy stem control options are performed by three relays on the board. In addition, the card includes five jumpers and three potentiometers. Jumpers allow users to adjust and repair feedback and current signals. Current and circuit feedback can be calibrated using a potentiometer.

Before handling the board, the user should check the installation parameters provided. When shipping from our team includes installing lubricants and anti-static wristbands. The 531X111PSHAEG1 card can only be handled and installed by qualified personnel. Complete wiring and installation instructions are provided in the device data sheet and manual. Manufacturer General Electric initially provided technical support to all members of the 531X series.