269-100P-HI 数字电机管理继电器

269-100P-HI 数字电机管理继电器

269-100P-HI 数字电机管理继电器

产品描述

269-100P-HI是GE制造的Multilin电机管理继电器。使用软件，用户可以使用 269-100P-HI 对设定值进行编程、读取实际值、监控状态以及绘制和查看所选实际值的趋势图。该模块标配RS485通信。

269-100P-HI 采用背光 LED 屏幕（48 个字符，字母数字）设计。显示屏下方有五个 LED 状态指示灯：跳闸、报警、辅助 1、辅助 2 和服务。只要激活输出，前四个 LED 指示灯就会亮起。服务指示灯仅在自检期间亮起。前面板底部是一个键盘，用于选择实际值、编程设定值以及选择报警和跳闸的原因。外壳耐腐蚀阻燃，符合IP40X标准。

三相 CT 将输入电流信号缩放到 269-100P-HI 继电器。提供单独的接地故障CT来调节输入接地故障电流。

269-100P-HI 的额定控制功率为 90-300 VDC/80-265 VAC。该模块已通过 UL 认证、CSA 认证、CE 认证，并按照 ISO 标准制造。工作温度为 -25 至 +60 摄氏度，湿度为 0-95%，无冷凝。

269-100P-HI 数字电机管理继电器

Product description

The 269-100P-HI is a Multilin motor management relay manufactured by GE. With the software, users can use 269-100P-HI to program set values, read actual values, monitor status, and draw and view trend plots of selected actual values. The module is equipped with RS485 communication as standard.

The 269-100P-HI is designed with a backlit LED screen (48 characters, alphanumeric). Below the display are five LED status indicators: Trip, Alarm, Assist 1, Assist 2, and Service. Once the output is activated, the first four LED indicators will light up. The service indicator lights up only during the self-test. At the bottom of the front panel is a keyboard for selecting actual values, programming setpoints, and selecting the cause of alarm and trip. The housing is resistant to corrosion and flame retardant, in line with IP40X standards.

Three-phase CT scales the input current signal to the 269-100P-HI relay. A separate ground fault CT is provided to regulate the input ground fault current.

The 269-100P-HI is rated for 90-300 VDC/80-265 VAC. The module is UL certified, CSA certified, CE certified and manufactured according to ISO standards. Operating temperature is -25 to +60 degrees Celsius, humidity is 0-95%, no condensation.