GE DS200UDSAG1ADE PLC处理器板卡 CPU模块

GE DS200UDSAG1ADE PLC处理器板卡 CPU模块

GE DS200UDSAG1ADE PLC处理器板卡 CPU模块

GE励磁板DS20OUDSAG1ADE具有一个180196微处理器和多个可擦除可编程只读存储器(EPROM)模块。

GE励磁板DS200UDSAG1ADE还装有21个4字符显示器和32个LED。因为电路板装有微处理器，所以电路板和驱动器在通风良好的环境中运行非常重要。周围环境也干净，没有灰尘、污垢和油污。要创造一个干净凉爽的环境，您选择安装驱动器的位置是首要考虑的因素。

要选择位置，请考虑其他驱动器和设备距离足够远，不会导致过热情况。驱动器还通风良好，在某些情况下需要风扇来冷却现场。如果使用风扇，请确保它们处于良好状态并且适合空间大小。冷空气通过驱动器底部的通风孔进入驱动器。空气穿过驱动器并从组件中带走热量。在驱动器的顶部，热空气从驱动器中排出。

GE DS200UDSAG1ADE PLC处理器板卡 CPU模块

The GE excitor board DS20OUDSAG1ADE has a 180196 microprocessor and multiple erasable programmable read-only memory (EPROM) modules.

The GE exciter DS200UDSAG1ADE also houses 21 4-character displays and 32 leds. Because the board houses the microprocessor, it is important that the board and driver operate in a well-ventilated environment. The surroundings are also clean, free of dust, dirt and oil. To create a clean and cool environment, the location where you choose to install the drive is the primary consideration.

To select a location, consider that the other drives and devices are far enough away that they will not cause overheating conditions. The drive is also well ventilated and in some cases requires fans to cool the site. If you use fans, make sure they are in good condition and fit the size of the space. Cold air enters the drive through a vent hole at the bottom of the drive. Air passes through the drive and removes heat from the components. At the top of the drive, hot air is expelled from the drive.