DS200TCEAG1BNE 美国GE CPU控制器模块 PLC模块

DS200TCEAG1BNE 美国GE CPU控制器模块 PLC模块

DS200TCEAG1BNE 美国GE CPU控制器模块 PLC模块

产品描述

GE紧急超速板DS200TCEAG1BNE具有一个微处理器和用于多个可编程可擦除只读存储器(EPROM)模块的插槽。它还包含3个保险丝、30个跳线和2个卡口连接器。

GE'紧急超速板DS200TCEAG1BNE上的保险丝用于保护板上的组件免受电压尖峰或其他不规则电压条件的影响。每个保险丝保护电路板上的一个或多个组件。每个保险丝在电路板上都有一个ID。每个保险丝都以FU为前缀，并以数字为后缀。例如，一根保险丝是FU1，一根是FU2，还有一根是FU3。更换保险丝时，必须确保使用相同类型和额定值的保险丝进行更换。允许更多电流的保险丝可能会损坏电路板组件。因此，插入具有相同规格的保险丝很重要。

如果您怀疑电路板没有按预期运行，您可以检查保险丝是否完好无损。如果一个保险丝烧断，更换它是一项简单的任务。要更换保险丝，请用拇指和食指从保险丝连接器上取下熔断的保险丝。然后，将新保险丝对准保险丝连接器上的夹子并将其压入连接器。

DS200TCEAG1BNE 美国GE CPU控制器模块 PLC模块

Product description

The GE Emergency Overdrive board DS200TCEAG1BNE has a microprocessor and slots for multiple programmable erasable read-only memory (EPROM) modules. It also contains 3 fuses, 30 jumpers and 2 bayonet connectors.

The fuse on the GE' Emergency overdrive board DS200TCEAG1BNE is used to protect the components on the board from voltage spikes or other irregular voltage conditions. Each fuse protects one or more components on the circuit board. Each fuse has an ID on the circuit board. Each fuse is prefixed with FU and suffixed with a number. For example, one fuse is FU1, one is FU2, and one is FU3. When replacing a fuse, you must ensure that the fuse is replaced with the same type and rating. Fuses that allow more current may damage board components. Therefore, it is important to insert fuses with the same specifications.

If you suspect that the board is not operating as expected, you can check that the fuse is intact. If a fuse blows, replacing it is a simple task. To replace the fuse, use your thumb and forefinger to remove the blown fuse from the fuse connector. Then, align the new fuse with the clip on the fuse connector and press it into the connector.