DS200LDCCH1AGA 用作驱动控制和局域网(LAN)通信板

DS200LDCCH1AGA 用作驱动控制和局域网(LAN)通信板

DS200LDCCH1AGA 用作驱动控制和局域网(LAN)通信板

通用电气公司开发了DS200LDCCH1AGA卡，用作驱动控制和局域网(LAN)通信板。这张卡存放在Mark V系列替换驱动板兼容GE品牌DIRECTO-MATIC 2000驱动器和激励器。当安装在驱动器中时，该板为驱动器提供一系列驱动器和I/O控制功能。

DS200LDCCH1AGA通信卡容纳四个微处理器在船上。A局域网控制处理器(LCP)可接受五种不同的总线类型被传送到硬盘。A驱动控制处理器(DCP)也可用于处理模拟和数字I/O转换。

DCP还能够控制和转换外围I/O设备，如编码器和定时器。电机控制处理器(MCP)用于处理发送到驱动器的数字I/O。如果计算需要DCP无法提供的额外处理能力， 共电机处理器(CMP)将提供完成这些功能所需的额外动力。该板配有一个字母数字键盘，用于系统编程和诊断。

DS200LDCCH1AGA 用作驱动控制和局域网(LAN)通信板

General Electric developed the DS200LDCCH1AGA card for use as a drive control and local area network (LAN) communication board. This card is stored on a Mark V Series replacement driver board compatible with GE brand DIRECTO-MATIC 2000 drives and exciters. When installed in a drive, the board provides the drive with a range of drive and I/O control functions.

The DS200LDCCH1AGA communication card accommodates four microprocessors on board. A Local Area Network Control Processor (LCP) can accept five different bus types to be transferred to the hard disk. A Drive Control Processor (DCP) can also be used to handle analog and digital I/O conversions.

DCP is also able to control and convert peripheral I/O devices such as encoders and timers. The motor control processor (MCP) is used to process the digital I/O sent to the drive. If computing requires additional processing power that a DCP cannot provide, a common-motor processor (CMP) will provide the extra power needed to accomplish these functions. The board is equipped with an alphanumeric keyboard for system programming and diagnostics.