伺服驱动 A06B-6162-H003 控制变频器模块

伺服驱动 A06B-6162-H003 控制变频器模块

伺服驱动 A06B-6162-H003 控制变频器模块

开关量输入输出的点数可编程控制器开关量输入输出总点数是计算所需内存储器容量的重要根据。

一般系统中，开关量输入和开关量输出的比为6：4。模拟量输入输出总点数具有模拟量控制的系统就要用到数字传送和运算的功能指令，这些功能指令内存利用率较低，因此所占内存数要增加。

功能、结构要合理单机控制往往是用一台可编程控制器控制一台设备，或者一台可编程控制器控制几台小设备，例如对原有系统的改造、完善其功能等。

单机控制没有可编程控制器间的通信问题；但功能要求全面。选择箱体式结构的可编程控制器为好。

伺服驱动 A06B-6162-H003 控制变频器模块

The total number of switch input and output points of a programmable controller is an important basis for calculating the required memory capacity.

In a general system, the ratio of switching input to switching output is 6:4. Analog input and output total number of points with analog control systems need to use digital transmission and operation of the functional instructions, these functional instructions memory utilization is low, so the number of memory to increase.

Function, structure to be reasonable single-machine control is often to use a programmable controller to control a device, or a programmable controller to control several small devices, such as the transformation of the original system, improve its function.

The single machine control has no communication problem between programmable controllers; But the functionality is comprehensive. Choose the box structure of the programmable controller is good.