GE通用电气 IC200ALG327H模块控制器燃机卡机

GE通用电气 IC200ALG327H模块控制器燃机卡机

GE通用电气 IC200ALG327H模块控制器燃机卡机

维护工作有以下几点：

(1）完善DCS系统管理制度。

(2）空调设备稳定运行,***室温变化小于±5℃/h,避免由于温度、湿度急剧变化导致在系统设备上的凝露。

(3）尽量避免电磁场对系统的干扰,避免移动运行中的操作站、显示器等,避免拉动或碰伤设备连接电缆和通讯电缆等。

(4）注意防尘，现场与控制室合理隔离，并定时清扫，保持清洁，防止粉尘对元件运行及散热产生不良影响;

(5）严禁使用非正版软件和安装与系统无关软件。

(6）做好控制子目录文件的备份,各自控回路的PID参数、调节器正反作用等系统数据记录工作。

(7）检查控制主机、显示器、鼠标、键盘等硬件是否完好,实时监控工作是否正常。

GE通用电气 IC200ALG327H模块控制器燃机卡机

Maintenance work has the following points:

(1) Improve the DCS system management system.

(2) The stable operation of the air conditioning equipment, the temperature change is less than ±5℃/h, to avoid condensation on the system equipment due to rapid changes in temperature and humidity.

(3) Try to avoid electromagnetic field interference to the system, avoid moving the operating station, display, etc., and avoid pulling or damaging the equipment connection cable and communication cable.

(4) Pay attention to dust prevention, reasonable isolation between the site and the control room, regular cleaning, keep clean, to prevent dust on the component operation and heat dissipation;

(5) It is strictly prohibited to use non-genuine software and install software unrelated to the system.

(6) Backup the control subdirectory files, record the PID parameters of the respective control loop, the positive and negative effects of the regulator and other system data.

(7) Check whether the hardware of the control host, display, mouse, keyboard and so on is intact, and whether the real-time monitoring work is normal.