GE模块 URRHH 美国通用备件

GE模块 URRHH 美国通用备件

GE模块 URRHH 美国通用备件

在完全兼容的功率配置文件（PP）网络中，对等延迟和处理延迟机制补偿了主机和中继器之间的所有延迟。

在这样的网络中，设置为零。GE URRHH在包含不实现这两种机制的一个或多个交换机和/或时钟的网络中，并非所有延迟都得到补偿，因此消息到达中继器的时间晚于消息中指示的时间。

GE URRHH该设置可用于近似补偿延迟。由于中继器不知道动态改变未补偿延迟量的网络切换，因此不存在总是完全校正未补偿延迟的设置。如果知道这些值，可以选择一种设置，GE URRHH将较坏情况下的误差减少到较小和较大未补偿延迟之间范围的一半。

端口4（5）路径延迟不对称范围：-1000到 1000 ns，步长为1 ns默认值：0 ns该设置对应于PTP中的“延迟不对称”，其被对等延迟机制用来补偿链路的两个方向之间的传播延迟的任何差异。除特殊情况外，这两种纤维的长度和成分基本相同，因此设置为零。

用于 Multilin 通用继电器系统 UR 系列的 UR-RHH General Electric 电源模块有哪些独特特性？Multilin 通用继电器系统接受 UR-RHH 电源。35 W 时的范围为 125 至 250 V，35 VA 时的范围为 100 至 240 VAC。Multilin UR-RHH 采用黑色哑光机身，增强美观性并保护底层板。

GE模块 URRHH 美国通用备件

In a fully compatible power profile (PP) network, peer delay and processing delay mechanisms compensate for all delays between the host and the repeater.

In such a network, the value is set to zero. GE URRHH In a network that contains one or more switches and/or clocks that do not implement either mechanism, not all latency is compensated, so the message arrives at the repeater later than indicated in the message.

GE URRHH This setting can be used to approximate compensation delays. Since the repeater is not aware of a network switch that dynamically changes the amount of uncompensated delay, there is no setting that always fully corrects the uncompensated delay. If these values are known, you can choose a setting where GE URRHH reduces the error for the worse case to half the range between smaller and larger uncompensated delays.

Port 4 (5) Path delay Asymmetry range: -1000 to 1000 ns, step size is 1 ns Default: 0 ns This setting corresponds to "delay asymmetry" in PTP, which is used by a peer-to-peer delay mechanism to compensate for any difference in propagation delay between the two directions of the link. Except in special cases, the length and composition of the two fibers are basically the same, so they are set to zero.

What are the unique features of the UR-RHH General Electric power module for the Multilin Universal Relay System UR Series? The Multilin universal relay system accepts UR-RHH power supply. The range is 125 to 250 V at 35 W and 100 to 240 VAC at 35 VA. The Multilin UR-RHH features a black matte body to enhance aesthetics and protect the bottom plate.