DS215KLDBG1AZZ03A DS200KLDBG1ABC工控产品PLC/DCS控制模块

DS215KLDBG1AZZ03A DS200KLDBG1ABC工控产品PLC/DCS控制模块

DS215KLDBG1AZZ03A DS200KLDBG1ABC工控产品PLC/DCS控制模块

DS200KLDBG1ABC是Mark V Speedtronic系统中使用的阿格部件。Mark V是最后一个用于控制燃气或蒸汽涡轮机的Speedtronic系统。这是一个灵活的基于微处理器的控制系统，具有TMR架构，设计有内置诊断和在线维护。

通用电气公司不再销售DS200KLDBG1ABC，但可以通过AX Control找到该产品，既可以作为翻新产品，也可以作为清算剩余(新使用)库存。请注意，DS200系列主板是没有更新固件或组件的旧设备；如果您的系统需要这些更新，请查看DS215系列中的类似主板。

DS200KLDBG1ABC用作显示板。它是一个大的矩形板，只有几个间隔良好的组件。这包括32个垂直灯组件，放置在电路板右下象限的四行中，每行八个。集成电路和电阻网络阵列放置在这些灯之间。更多的集成电路聚集在左下角，包括现场可编程门阵列和至少一个振荡芯片。

该板有几个板连接器，包括两个垂直引脚组件。该板有两个跳线开关、电容、二极管和电阻。电路板的顶部由七个LED显示屏组成。这些显示器设计用于数字显示，使用16段数字。板上标有C-ESS和6BA01之类的代码。板的角和边被钻孔以允许安装。

DS215KLDBG1AZZ03A DS200KLDBG1ABC工控产品PLC/DCS控制模块

The DS200KLDBG1ABC is an AG part used in the Mark V Speedtronic system. The Mark V was the last Speedtronic system to control gas or steam turbines. It is a flexible microprocessor-based control system with a TMR architecture, designed with built-in diagnostics and online maintenance.

Ge no longer sells DS200KLDBG1ABC, but the product can be found through AX Control, both as a refurbished product and as a way to liquidate surplus (newly used) inventory. Please note that DS200 series motherboards are older devices with no updated firmware or components; If your system needs these updates, check out similar motherboards in the DS215 family.

DS200KLDBG1ABC is used as the display board. It is a large rectangular plate with only a few well-spaced components. This consists of 32 vertical light components, placed in four rows of eight in each row in the lower right quadrant of the board. An integrated circuit and resistor network array are placed between these lights. More integrated circuits are clustered in the lower left corner, including a field-programmable gate array and at least one oscillating chip.

The board has several board connectors, including two vertical pin assemblies. The board has two jumper switches, capacitors, diodes and resistors. The top of the board consists of seven LED displays. These displays are designed for digital display, using 16 segments of numbers. The boards are marked with codes such as C-ESS and 6BA01. The corners and edges of the board are drilled to allow for installation.