GE通用电气 8102-HO-IP 通道模拟输出模块

GE通用电气 8102-HO-IP 通道模拟输出模块

GE通用电气 8102-HO-IP 通道模拟输出模块

特征

PAC8000 I/O是完全模块化的I/O解决方案，适用于通用和危险区域应用。它提供各种I/O功能，并具有开放式架构，通过选择适当类型的总线接口模块(BIM)或控制器，允许与各种不同的现场总线进行通信。

现场端子(每个I/O模块一个)卡在载体上，无需额外的端子或连接即可接受现场接线。如果在现场损坏，可以很容易地更换它们。全面的机械键控系统确保了设备的安全性。

载体通过安装在平板或T或G截面DIN导轨上形成PAC8000s的物理和电气主干。它们支持并互连BIM或控制器、电源、I/O模块和现场终端，并承载内部轨道总线的地址、数据和电源线

开路和短路检测

阀门定位器和远程指示器

GE通用电气 8102-HO-IP 通道模拟输出模块

trait

The PAC8000 I/O is a fully modular I/O solution for general purpose and hazardous area applications. It offers a variety of I/O functions and has an open architecture that allows communication with a wide variety of different fieldbuses by selecting the appropriate type of bus interface module (BIM) or controller.

Field terminals (one per I/O module) are clamped to the carrier and can accept field wiring without additional terminals or connections. If damaged in the field, they can be easily replaced. A comprehensive mechanical keying system ensures equipment safety.

The carrier forms the physical and electrical backbone of the PAC8000s by mounting on a flat plate or T or G section DIN rail. They support and interconnect BIM or controllers, power supplies, I/O modules, and field terminals, and carry the addresses, data, and power cords of the internal track bus

Open and short circuit detection

Valve positioners and remote indicators,