GE 美国通用电气 DS200UDSAG1A 控制器 模块 卡件

GE 美国通用电气 DS200UDSAG1A 控制器 模块 卡件

GE 美国通用电气 DS200UDSAG1A 控制器 模块 卡件

DS200UDSAG1A：分解的视图。在本手册的备件章节中，有许多分解视图折叠文件说明了机器人部件，旨在促进快速识别所需的服务类型和各种组件的组成。这些部件是以下文件夹上的项目编号。

在“箭头” lt; >）中，这些文件被称为爆炸视图编号。如果引用折叠编号，除了段落标题中指定的外，折叠编号包含在项目编号引用中，例如<5/19>或<10：2/5>，引用折叠编号的斜杠前的数字(s)。

DS200UDSAG1A：括号 中的数字是指文本中的数字。以下文件还包括文章编号、名称和相关数据等信息。N.B.本手册不应被视为一个适当的培训课程的替代品。本文件打算在课程完成后使用。

机械单元包含几个太重的部件。由于这些部件在任何维护和维修工作中都必须精确地移动，因此配备合适的起吊设备是很重要的。在允许任何人进入其工作空间之前，机器人应该一直切换到电机关闭。

GE 美国通用电气 DS200UDSAG1A 控制器 模块 卡件

DS200UDSAG1A: Decomposed view. In the Spare Parts section of this manual, there are a number of breakdown view folding files that describe robot parts, designed to facilitate rapid identification of the type of service required and the composition of various components. These parts are item numbers on the following folders.

In the "arrow" lt; >), these files are called Explosion view numbers. If referencing the fold number, except as specified in the paragraph heading, the fold number is included in the item number reference, such as <5/19> or < 10:2/5 >, the number (s) before the slash that references the fold number.

DS200UDSAG1A: The numbers in parentheses refer to the numbers in the text. The following files also include information such as article number, name, and related data. N.B. This manual should not be considered as a substitute for an appropriate training course. This document is intended for use after completion of the course.

The mechanical unit contains several parts that are too heavy. Since these parts must be moved precisely during any maintenance and repair work, it is important to have the right lifting equipment. The robot should always switch to motor off before allowing anyone into its workspace.