531X305NTBAJG1 NTB/3TB端子板

通用电气 531X305NTBAJG1 卡被开发用作 NTB/3TB 终端板。  该卡是使用 531X 系列替换驱动器和激励器板制造的。  安装此板后，将提供许多关键的器件功能。  该卡的一些接口功能包括继电器和串行输出、电源、编码器和模拟 I/O。

NTB/3TB 终端板为主机驱动器提供了许多重要功能。 安装后，531X305NTBAJG1 卡可以产生额定值为 5 VDC 和 15 VDC 的稳压输出电源。 该板还生产 24 VDC 和 120 VAC 的非稳压电源。 卡上的跳线还允许 5 V 和 15 V 编码器的接口配置。  板内有 7 个继电器，分别是 C 型或 A 型输出类型。 每个继电器的触点命运为 120 VAC。 板上还有四个电位计。 这些允许进行低级模拟 I/O 缩放。

多通道控制：该端子板具有多个控制通道，用于同时监测和控制多个工业过程变量。

可编程性：部分型号的NTB/3TB端子板可能可编程功能，允许用户根据特定应用需求配置控制逻辑和参数。

通讯接口：支持多种通讯接口，如以太网、串口（RS-232、RS-485）、Profibus、Modbus等，便于与其他设备和系统进行数据交换和通信。

电源输出：提供稳压和非稳压电源输出，满足不同设备的电源需求。

继电器输出：包含多个继电器输出，用于控制各种负载。

模拟I/O：支持模拟输入/输出，允许用户处理模拟信号。

编码器接口：带有编码器接口，支持连接到驱动器或其他需要编码器信号的设备。

531X305NTBAJG1 NTB/3TB端子板

The GE 531X305NTBAJG1 card was developed for use as an NTB/3TB terminal board. The card is manufactured using the 531X series replacement driver and driver board. When installed, this board will provide a number of key device functions. Some of the interface features of the card include relays and serial outputs, power supply, encoder, and analog I/O.

The NTB/3TB terminal board provides many important functions for the host drive. When installed, the 531X305NTBAJG1 card can produce regulated output power rated at 5 VDC and 15 VDC. The board also produces 24 VDC and 120 VAC unregulated power supplies. The jumper on the card also allows for interface configuration of the 5 V and 15 V encoders. There are 7 relays in the board, which are of type C or Type A output type. The contact fate of each relay is 120 VAC. There are also four potentiometers on the board. These allow low-level analog I/O scaling.

Multi-channel control: The terminal board has multiple control channels for monitoring and controlling multiple industrial process variables simultaneously.

Programmability: Some models of NTB/3TB terminal boards may be programmable, allowing users to configure control logic and parameters according to specific application requirements.

Communication interface: Support a variety of communication interfaces, such as Ethernet, serial port (RS-232, RS-485), Profibus, Modbus, etc., to facilitate data exchange and communication with other devices and systems.

Power output: Provides regulated and unregulated power output to meet the power requirements of different devices.

Relay outputs: Contains multiple relay outputs to control various loads.

Analog I/O: Supports analog input/output, allowing users to process analog signals.

Encoder interface: Comes with an encoder interface to support connection to a driver or other device requiring an encoder signal.