GE发那科全新原装供应正品现货V7768-320000模块 卡件

GE发那科全新原装供应正品现货V7768-320000模块 卡件

V7768/V7769符合6U板的VME物理规范。V7768/V7769可以用于系统控制器或用作外围板。它可以直接插入任何接受任何类型板的标准机箱。

以下步骤描述了GE建议的V7768/V7769:1的安装和通电方法。如果要使用PMC模块，请在安装板之前将其连接到V7768/V7769。

有关配置和设置，请参阅PMC模块的产品手册。注意，散热器输出侧测得的空气流量应大于450 LFM.2。将V7768/V7769插入VME机箱系统控制器或外围插槽。

The V7768/V7769 complies with the VME physical specifications for 6U boards. The V7768/V7769 can be used as a system controller or as a peripheral board. It can be plugged directly into any standard case that accepts any type of board.

The following steps describe GE's recommended installation and power-on method for the V7768/V7769:1. If you want to use the PMC module, connect it to the V7768/V7769 before installing the board.

Refer to the product manual for the PMC module for configuration and setup. Note that the measured air flow on the output side of the radiator should be greater than 450 LFM.2. Insert the V7768/V7769 into the system controller or peripheral slot in the VME chassis.