IS220PVIBH1A  振动模块

IS220PVIBH1A  振动模块

IS220PVIBH1A  振动模块

IS220PVIBH1A 是一款由德国 Weidmüller Interface GmbH & Co. KG 生产的通用振动监测器，用于监控工业控制和自动化应用中的设备振动。它具有以下特点：

多种传感器类型支持：IS220PVIBH1A 支持多种传感器类型，包括逼近传感器、集成输出加速度计、速度传感器和地震传感器，可满足不同应用需求。

高精度测量：IS220PVIBH1A 采用高精度的传感器和测量芯片，可提供高精度的测量结果。

多通道测量：IS220PVIBH1A 支持多通道测量，最多可连接 12 个传感器，可同时监测多个设备的振动。

多种报警功能：IS220PVIBH1A 提供多种报警功能，可在设备出现异常振动时及时报警，防止事故发生。

应用

IS220PVIBH1A 可广泛应用于各种工业控制和自动化应用，包括：

旋转机械监测： 监测旋转机械（如电机、泵、风扇等）的振动，及时发现故障并进行维护。

轴承监测： 监测轴承的振动，及时发现轴承磨损或损坏。

结构健康监测： 监测建筑物、桥梁等结构的振动，评估结构健康状况。

地震监测： 监测地震活动，提供地震预警。

技术规格

参数 值

支持的传感器类型 逼近传感器、集成输出加速度计、速度传感器、地震传感器

测量范围 0.01 g 至 10 g

测量精度 ±0.5%FS

通道数 1 至 12 通道

通信接口 RS-232、Modbus TCP

尺寸 96 毫米 x 48 毫米 x 24 毫米

IS220PVIBH1A  振动模块

The IS220PVIBH1A is a general purpose vibration monitor manufactured by Weidmuller Interface GmbH & Co. KG in Germany for monitoring equipment vibration in industrial control and automation applications. It has the following characteristics:

Multiple sensor types support: The IS220PVIBH1A supports a variety of sensor types, including proximity sensors, integrated output accelerometers, speed sensors, and seismic sensors to meet different application needs.

High-precision measurement: The IS220PVIBH1A uses high-precision sensors and measurement chips to provide high-precision measurement results.

Multi-channel measurement: The IS220PVIBH1A supports multi-channel measurement and can connect up to 12 sensors to monitor the vibration of multiple devices simultaneously.

Multiple alarm functions: IS220PVIBH1A provides a variety of alarm functions, which can alarm in time when the equipment is abnormal vibration to prevent accidents.

Apply

The IS220PVIBH1A can be used in a wide range of industrial control and automation applications, including:

Rotating machinery monitoring: monitoring the vibration of rotating machinery (such as motors, pumps, fans, etc.), timely detection of faults and maintenance.

Bearing monitoring: monitoring bearing vibration, timely detection of bearing wear or damage.

Structural health monitoring: Monitoring the vibration of buildings, Bridges and other structures to assess the structural health status.

Seismic monitoring: Monitoring seismic activity and providing early warning of earthquakes.

Technical specification

Parameter value

Supported sensor types Approximation sensor, integrated output accelerometer, speed sensor, seismic sensor

Measuring range 0.01 g to 10 g

Measuring accuracy ±0.5%FS

Number of channels 1 to 12 channels

Communication ports RS-232 and Modbus TCP

Dimensions 96 mm x 48 mm x 24 mm