Foxboro FBM211控制器

Foxboro FBM211控制器

Foxboro FBM211控制器

产品说明

FBM211的紧凑设计、结实的压制铝外壳，保护了电子线路不受物理损害。FBM外壳的特殊设计，使组件能适应各种不同的环境需求，高的环境等级是ISA标准S71.04。 

在组件的前端由发光二极管LEDS）组成的显示器，它形象化的显示组件当前的工作状态。  

组件可在无须拆除现场设备端子电缆、电源，以及通讯电缆的情况下进行带电拆拨或更换。

输入:16组隔离独立通道

输入范围(每个通道):0至20.4 mA dc(每个通道电流限制为33 mA)

通信:通过冗余的2 Mbps模块现场总线与其相关的FCM或FCP通信

输入电压范围(冗余):24伏直流电+5%，-10%

功耗:24伏直流电时为7瓦(最大值)，24伏直流电时为11瓦(最大值)，所有输入为20.4毫安(内部电源)

尺寸(HxWxD)，约为:10.2厘米/11.4厘米(包括安装凸耳)x 4.5cm厘米x 10.4cm厘米

运输重量:2公斤

Foxboro FBM211控制器

Product description

The compact design and robust pressed aluminum housing of the FBM211 protects the electronic circuitry from physical damage. The special design of the FBM housing enables the components to adapt to a variety of different environmental requirements, the highest environmental grade is ISA standard S71.04.

A display composed of light-emitting diode LEDS at the front end of the component, which visualizes the current working state of the component.

Components can be removed or replaced on line without removing the terminal cables, power supplies, and communication cables.

Input :16 groups isolated independent channels

Input range (per channel):0 to 20.4 mA dc(current limited to 33 mA per channel)

Communication: Communication with its associated FCM or FCP via a redundant 2 Mbps module fieldbus

Input voltage range (redundancy): 24V DC +5%, -10%

Power consumption: 7 watts at 24 volts DC (Max), 11 watts at 24 volts DC (Max), 20.4 MA for all inputs (internal power)

Dimensions (HxWxD), approximately :10.2 cm /11.4 cm (including mounting lugs)x 4.5cm x 10.4cm

Shipping weight :2 kg