RH924YFFOXBORO DCS系统 PLC模块 伺服控制

RH924YFFOXBORO DCS系统 PLC模块 伺服控制

RH924YFFOXBORO DCS系统 PLC模块 伺服控制

S800L VO 24V DC模件为1组16通道，输入模件可以组态是否监控现场电源状态，电源故障将置位模件警告及通道错误状态。

电源模件电源模件用于给系统控制器及S800 I/O模件提供标准24V DC电源，作为可选项也可以给现场I/O信号提供工作电源.但要注意计算电流容量.

电源模件输出侧具备短路保护.电源模件可以并行使用提供双倍电能.也可以增加一个SS822冗余切换单元实现电源冗余功能，SS822冗余切换单元自动监控电源状态，同时自动无扰切换电源供电。

RH924YFFOXBORO DCS系统 PLC模块 伺服控制

The S800L VO 24V DC module is a set of 16 channels. The input module can configure whether to monitor the field power status, and set the module warning and channel error status for power failure.

Power module The power module is used to provide standard 24V DC power to the system controller and S800 I/O modules, and optionally to provide working power to the field I/O signals. But be careful to calculate the current capacity.

The output side of the power module has short-circuit protection. Power modules can be used in parallel to provide double power. An SS822 redundant switching unit can also be added to realize the power redundancy function. The SS822 redundant switching unit automatically monitors the power status and automatically provides power with undisturbed switching power.