IPM2-P0904HA供应电气产品PLC/DCS卡件模块

IPM2-P0904HA供应电气产品PLC/DCS卡件模块

IPM2-P0904HA供应电气产品PLC/DCS卡件模块

FOXBORO IPM2-P0904HA 福克斯波罗I/A Series系统可提供产品详细资料:输出端接线分为独立输出和公共输出。在不同组中，可采用不同类型和电压等级的输出电压。但在同一组中的输出只能用同一类型、同一电压等级的电源。

由于PLC的输出元件被封装在印制电路板上，IPM2-P0904HA并且连接至端子板，若将连接输出元件的负载短路，将烧毁印制电路板

● 采用继电器输出时，所承受的电感性负载的大小，会影响到继电器的使用寿命，因此，使用电感性负载时应合理选择，或加隔离继电器。

● PLC的输出负载可能产生干扰，因此要采取措施加以控制，如直流输出的续流管保护，交流输出的阻容吸收电路，晶体管及双向晶闸管输出的旁路电阻保护。

FOXBORO IPM2-P0904HA Foxboro I/A Series system can provide product details: The output terminal wiring is divided into independent output and public output. In different groups, different types and voltage levels of output voltages can be used. However, the output in the same group can only use the same type of power supply and the same voltage level.

Since the output component of the PLC is packaged on the printed circuit board, IPM2-P0904HA and connected to the terminal board, if the load connected to the output component is short-circuited, the printed circuit board will be burned

● When the relay output is used, the size of the inductive load to be borne will affect the service life of the relay, therefore, the use of inductive load should be a reasonable choice, or add an isolated relay.

● The output load of PLC may cause interference, so measures should be taken to control it, such as continuous current tube protection for DC output, resistance and capacitance absorption circuit for AC output, and bypass resistance protection for transistor and bidirectional thyristor output.