A6210 EMERSON 输入输出卡件 全新进口

A6210 EMERSON 输入输出卡件 全新进口

A6220 A6410 A6824一种基于CMOS的低压差正电压调节器+2.5V至6.0V。输出电压可选，范围从1.0V到5.0V，可提供高达1.0A的电流。热防护热过载保护限制A6110中的总功耗超过TJ=165°C时，OTP电路启动热关机功能并关闭传递元件允许IC冷却。

在IC的结温度冷却后，OTP电路再次接通通路元件在连续热过载条件下，30°C的温度会产生脉冲输出。热过载保护设计用于在故障情况下保护A6110。不要超过绝对值连续运行的最大结温额定值TJ=125°C。

内置折返电流当输出电压下降时，限位保护电路将减小电流值。当输出对地短路时，电流限制降低到250mA，避免损坏设备。

A6220 A6410 A6824 A CMOs-based low voltage differential positive voltage regulator +2.5V to 6.0V. Output voltages are optional, ranging from 1.0V to 5.0V, providing up to 1.0A of current.

Thermal protection Thermal overload protection limits When the total power consumption in the A6110 exceeds TJ=165°C, the OTP circuit activates the thermal shutdown function and shuts down the transfer element to allow the IC to cool. After the junction temperature of the IC is cooled, the OTP circuit re-opens the channel element.

Under continuous thermal overload conditions, a temperature of 30°C produces a pulse output. Thermal overload protection is designed to protect the A6110 in case of failure. Do not exceed the maximum junction temperature rating TJ=125°C for absolute continuous operation. Built-in return current When the output voltage drops, the limit protection circuit will reduce the current value. When the output is short-circuited to the ground, the current limit is reduced to 250mA to avoid damage to the device.