PR6424/000-030+CON021 轴位移传感器

双通道轴位移变送器MMS 3210将涡流传感器的输入信号转换为两个独立的与轴成比例的信号

位移响应。亲属膨胀集成模块和传感器监督检测故障功能传感器和模块电子。在这种情况下

ok输出（通道清除）更改以及4…20mA电流输出表示0毫安。所有设置均使用跳线进行和DIP开关。变送器随附适用于大多数应用程序，如果需要的话可以准备其他配置在工厂里。

工作原理：

涡轮传感器与前置器形成一个振荡器，振幅随着传感器探头与金属被测物的接近与衰减，衰减的幅度与传感器和被测物之间的距离成正比。出厂前已经使用校准材料42CrMo4对传感器与前置器成套地进行了线性校准，因此安装时不需要再做校准。用户只需要调整传感器和测量面之间的气隙，直至从前置器的输出得到所需信号。 

PR6424/000-030+CON021 轴位移传感器

PR6424/000-030+CON021 轴位移传感器

The dual-channel axial displacement transmitter MMS 3210 converts the input signal from the eddy current sensor into two independent signals proportional to the shaft

Displacement response. Kinship expansion integrated modules and sensors supervise the detection of fault function sensors and module electronics. In this case

ok output (channel clear) changes and 4... The 20mA current output represents 0mA. All Settings are performed using jumpers and DIP switches. The transmitter is included for most applications, and additional configurations can be prepared in the factory if required.

How it works:

The turbine sensor and the preprocessor form an oscillator, and the amplitude of the attenuation is proportional to the distance between the sensor and the measured object as the sensor probe approaches and attenuates. The sensor and preprocessor have been linearly calibrated in complete sets using calibration material 42CrMo4 before delivery, so no calibration is required during installation. The user only needs to adjust the air gap between the sensor and the measuring surface until the desired signal is obtained from the output of the preprocessor.

PR6424/000-030+CON021 轴位移传感器

ABB DCSABB CI855K01 3BSE018106R1 MB300接口模块 CI855 库存Abb 07KT92C GJR5250500R0202脉冲放大器板

ABB DCSABB CI861K01 3BSE058590R1 PLC通讯接口模块 CI861 库存ABB GJR2332200R0100 88FT01D基础模块

ABB DCSABB CI871K01 3BSE056767R1通讯模块 CI871 CI871AK01Abb GJR5251300R1101 07KT93C摩尔系列模块

ABB DCSABB CI920AS CI920B CI920S CI920N S900通讯接口模块CIPB 库存ABB GJR5215900R38114 ZE82DCS电源模块

ABB DCSABB CPU板卡控制 OCAH sattcontrol 940-181-103 库存ABB GJR5215100R38048 NG82I/O模件

ABB DCSABB CPU处理器 PM595-4ETH-F 1SAP155500R0279 库存 PLC模块ABB GJR5211900R28064 TI80光电传感器

ABB DCSABB CPU处理器模块 PM590-ETH D8 订货号1SAP150000R017 库存ABB GJR5240100R1 07SK83模拟输入子模件

ABB DCSABB CPU控制器 PM902F 3BDH001000R1-REP 处理器单元 PM902ABB 89NG03 GJR4503500R001脉冲继电器

ABB DCSABB CPU控制器模块 PM590-ARCNET 订货号1SAP150000R0261 库存ABB GJR5253100R2360 07KT98-S H5机械手驱动器

ABB DCSABB CPU模块 DSPC155 57310001-CX 处理器单元 DSPC-155 库存ABB GJR5231200R0001 07AE83C机器人配件