EMERSON 艾默生 KJ3001X1-CB1 离散型输入输出模块

EMERSON 艾默生 KJ3001X1-CB1 离散型输入输出模块

EMERSON 艾默生 KJ3001X1-CB1 离散型输入输出模块

KJ3001X1-CB1：所有八个通道都与模块总线隔离。到输入级的电源是由模块总线上的24 V电源转换而成。该模块具有HART传递功能。只支持点对点通信。

可以使用8种不同类型的mtu。TU830/TU833扩展MTU可以三线连接设备。TU810（或TU814）紧凑型MTU有用于24 V工艺电压输入的端子，但需要外部端子来将24 V电源分配到现场设备。

KJ3001X1-CB1：如果使用HART，则需要进行工艺连接的屏蔽现场电缆。需要输入时，分流模式设置为内部分流，需要输入时设置为外部分流。

扩展的MTU、TU835和TU838为输出的发射器电源提供一个保险丝（最大3A）。TU818紧凑型MTU提供连接到双线变送器，无需外部封送器。TU812紧凑型MTU有一个D-Sub 25针（公）连接器，用于连接工艺。如果使用HART，则需要进行工艺连接的屏蔽现场电缆。

EMERSON 艾默生 KJ3001X1-CB1 离散型输入输出模块

KJ3001X1-CB1: All eight channels are isolated from the module bus. The power supply to the input stage is converted from the 24 V power supply on the module bus. This module has HART transfer function. Only point-to-point communication is supported.

Eight different types of Mtus are available. The TU830/TU833 extended MTU can connect devices with three wires. The TU810 (or TU814) compact MTU has terminals for 24 V process voltage input, but requires external terminals to distribute 24 V power to field equipment.

KJ3001X1-CB1: Shielded field cable required for process connection if HART is used. If input is required, set the diversion mode to internal diversion, and if input is required, set it to external diversion.

The extended MTU, TU835 and TU838 provide a fuse (Max. 3A) for the output transmitter power supply. The TU818 compact MTU provides connection to a two-wire transmitter without the need for an external transmitter. The TU812 compact MTU has a D-Sub 25-pin (male) connector for joining processes. If HART is used, shielded field cables for process connection are required.