HONEYWELL CC-PCNT02 CPU板卡 霍尼韦尔 CCPCNT02 处理器模块

HONEYWELL CC-PCNT02 CPU板卡 霍尼韦尔 CCPCNT02 处理器模块

这个可以使用带有至少486型PC和适当的PC软件。安装支架位置a、 探测器具有120度锥形视野（视角）。建议探测器位于主要火灾威胁位置探测器视野的轴。

由于探测器必须“看到”火灾才能探测到它，它应该安装在角落和天花板等位置避免视线堵塞。b、 选择将固定探测器与外壳材料类型保持一致地方例如，可以在安装支架，并用螺钉、铆钉等固定。

如果安装面为聚丙烯，可进行热焊接用于固定支架。c、 将外壳滑到安装支架上，直到它锁定到位。将每个“引线”连接到适当的连接上外部设备。接线见第6节表1细节。小心：在处理探测器的引线。正确使用腕带接地将有助于防止产品损坏。

This can be used with at least a type 486 PC and appropriate PC software. The detector has a 120-degree conical field of view (Angle of view). It is recommended that the detector be located on the axis of the detector field of view at the primary fire threat location.

Since the detector must "see" the fire in order to detect it, it should be installed in places such as corners and ceilings to avoid blocking the line of sight. B. Select the place where the fixed detector is consistent with the material type of the housing. For example, you can install the bracket and fix it with screws, rivets, etc.

If the mounting surface is polypropylene, it can be thermally welded for fixing the bracket. c. Slide the housing onto the mounting bracket until it locks into place. Connect each "lead" to the appropriate connected external device. The wiring is detailed in Table 1, Section 6. Caution: In handling detector leads. Proper use of wrist strap grounding will help prevent product damage.

PR6423/000-030十C0N021  
PR6424/010-120十C0N021   
PR6423/011-010十C0N021
PR6423/012-130+C0N021  
PR6423/00R-010+C0N021   
PR6423/03R-010+CON021 
PR6423/13R-010+C0N021   
PR6424/002-031
PR6423/016-030十C0N021  
PR6423/010-130十C0N021 
PR6423/015-010十CONO21   
PR6423/11R-131+C0N031 
PR9268/301-100 
PR9268/302-100 
PR9376/010-011  
A6120  
A6410