SCE905AN-002-01控制器供应用于同步和异步伺服电机

SCE905AN-002-01控制器供应用于同步和异步伺服电机

这SCE905AN-002-01是高性能的，媒介 力量 单一的 轴 伺服系统 驱动器它被设计成与无刷三相永磁电机耦合。这SCE905AN-002-01和该系列中的其他驱动器具有非常相似的接口。这些驱动器拥有类似的控制接口，电力电子设备与美国480 VAC线路以及欧洲400 VAC三相电源兼容。

这个驱动器有许多有用的功能。这包括完全数字化的死后无子女。-（以某事）为基础 控制电流环路和数字自动调谐有助于轻松和可预测的设置。该装置还在其软件中设置了系统和应用参数。此外，伺服驱动器包含一个数字的 分解器到数字的 转换器具有24位位置分辨率。该驱动器还具有先进的签名系列正弦电流控制，以支持低轴扭矩波动以及各种速度下的统一控制动态。此外SCE905AN-002-01拥有模块化结构以及用户可拆卸的选项卡，便于配置。

选项卡可用于SCE905AN-002-01。这些选项卡扩展了伺服驱动器的功能，并允许用户根据不同的参数调整设备。设备交付时未进行配置。要配置伺服驱动器，用户必须首先设置正确的参数。这些参数设置存储在设备的EEPROM存储器或选项卡中。这电可擦可编程只读存储器至少可以支持100，000次写入。平均而言，可以支持1，000，000次写入电可擦可编程只读存储器。为了防止未经授权更改驱动器的参数或特性，在伺服驱动器的基座内设置参数后，可以移除选项卡。

SCE905AN-002-01控制器供应用于同步和异步伺服电机

This SCE905AN-002-01 is a high-performance, media-force single shaft servo system driver which is designed to be coupled to a brushless three-phase permanent magnet motor. This SCE905AN-002-01 has a very similar interface to the other drives in the series. These drives have similar control interfaces, and the power electronics are compatible with US 480 VAC lines as well as European 400 VAC three-phase power supplies.

This drive has many useful features. This includes fully digital posthumous childlessness. - (something) based control current loop and digital automatic tuning contribute to easy and predictable setup. The device also sets the system and application parameters in its software. In addition, the servo drive contains a digital resolver to digital converter with 24-bit position resolution. The drive also features advanced signature series sinusoidal current control to support low shaft torque fluctuations as well as unified control dynamics at various speeds. In addition, the SCE905AN-002-01 has a modular structure and user-detachable tabs for easy configuration.

TAB available for SCE905AN-002-01. These tabs extend the function of the servo drive and allow the user to adjust the device according to different parameters. The device is not configured when delivered. To configure the servo drive, the user must first set the correct parameters. These parameter Settings are stored in the EEPROM memory or TAB of the device. This electrically erasable programmable read-only memory can support at least 100,000 writes. On average, it can support 1,000,000 writes to electrically erasable programmable read-only memory. To prevent unauthorized changes to the parameters or characteristics of the drive, the TAB can be removed after the parameters are set in the base of the servo drive.