DMC-1832 GALIL 伺服电机 PCI总线运动控制器

DMC-1832 GALIL 系列是为最具成本敏感性的应用而设计的PCI总线运动控制器。

DMC-18×2控制器适用于1-到4轴格式，并允许控制步进或伺服电机在任何轴的组合。

任何运动模式都可以编程，包括线性和圆形插补，轮廓，电子传动和ecam。

为了最大限度地降低成本，DMC-18×2上没有以下功能:5到8轴控制，输入光隔离，双编码器输入，以及辅助FIFO和DPRAM通信通道。如果您需要这些功能，请选择DMC-18×6 Accelera PCI控制器。

像所有的Galil控制器一样，DMC-18×2的编程简化了两个字母，直观的命令和一整套软件工具，如用于伺服调整和分析的GDK。

DMC-1832 GALIL 伺服电机 PCI总线运动控制器

The DMC-1832 GALIL series is a PCI bus motion controller designed for the most cost-sensitive applications.

The DMC-18×2 controller is suitable for 1- to 4-axis formats and allows control of stepper or servo motors in any combination of axes.

Any motion mode can be programmed, including linear and circular interpolation, contour, electronic drive, and ecam.

In order to minimize costs, the following features are not available on the DMC-18×2 :5 to 8 axis control, input light isolation, dual encoder input, and auxiliary FIFO and DPRAM communication channels. If you need these features, choose the DMC-18×6 Accelera PCI controller.

Like all Galil controllers, the DMC-18×2 is programmed with simplified two-letter, intuitive commands and a full suite of software tools such as GDK for servo tuning and analysis.