BI01 SIS PLC可编程控制系统模块 BI01-A-V001 

BI01 SIS PLC可编程控制系统模块 BI01-A-V001 

数字量输入系列90-30数字量输入模板将用户设备提供的AC和DC电源信号转化到PLC需要使用的逻辑信号，–个光学耦合器在输入电源和逻辑电路之间提供了隔离，可使用的数字量输入模板有8，16或32点的.

.数字量输出系列90-30数字量输出模板将逻辑信号转化为AC和DC电源信号从而满足驱动用户所提供的设备

编程模块和传动之间的通讯通过一个传动参数激活，（确保传动参数设置和模块的模式设置相一致）通讯被激活后，NAIO上的/O信号取代了部分标准I/O信号。

请参阅固件手册，参数组98。标准应用程序3.0及以下版本的用户，有关传动参数列表请参阅附录Eo

BI01 SIS PLC可编程控制系统模块 BI01-A-V001 

Digital Input Series 90-30 Digital input templates convert the AC and DC power signals provided by the user device to the logic signals needed by the PLC. An optical coupler provides isolation between the input power and the logic circuit. The digital input templates can be used in 8,16 or 32 points.

Digital Output Series 90-30 Digital output templates convert logic signals into AC and DC power signals to meet the requirements of the device provided by the driver

The communication between the programming module and the transmission is activated by a transmission parameter (ensuring that the transmission parameter Settings are consistent with the mode Settings of the module). Once the communication is activated, the /O signal on the NAIO replaces some of the standard I/O signals.

See Firmware manual, Parameter Group 98. For users of standard applications 3.0 and below, see Appendix Eo for a list of transmission parameters

BI01 SIS PLC可编程控制系统模块 BI01-A-V001 

BENTLY 3500/42M 128229-018通道数字输入Bently Nevada

BENTLY 3500/42MMBF板Bently Nevada

BENTLY 3500/42140471-01接口模件Bently Nevada

BENTLY 3500/42-09-0016通道数字输出模件Bently Nevada

BENTLY 3500/42-04-00电源模件Bently Nevada

BENTLY 3500/42-01-00可控硅Bently Nevada

BENTLY 3500/42 140471-01IO/DO模块Bently Nevada

BENTLY 3500/42通信板Bently Nevada

BENTLY 3500/40MI/O端子板Bently Nevada

BENTLY 3500/40-01-00双轴XY摇杆模块Bently Nevada

BENTLY 3500/33 149986-01直流调速器配件Bently Nevada

BENTLY 3500/33-01-00主板Bently Nevada

BENTLY 3500/33交换机电源Bently Nevada

BENTLY 3500/32 125712-01定位模块Bently Nevada

BENTLY 3500/32-01-00I/O模件Bently Nevada

BENTLY 3500/32 125712-01数字调制板Bently Nevada

BENTLY 3500/32环路通讯接口模件Bently Nevada