2213-75TSLKTB 激光器工控PLC系统

2213-75TSLKTB 激光器工控PLC系统

全部的运输损坏引起的索赔应向承运人提交，并提交完整的报告已发送给GE Fanuc嵌入式系统客户服务部，并请求：关于受损物品处置的建议。

警告：GE Fanuc嵌入式系统上组装的部分组件产品可能对静电放电敏感，并且可能会对电路板造成损坏其经受高能静电场。

当板被放置在板上时配置工作台等，建议在下面插入导电材料该板用于提供导电分路。

未使用的电路板应存放在相同的位置运输时使用的保护箱。VMIVME-7807/VME-7807RC经过系统运行测试并随附工厂配置的跳线和开关。

2213-75TSLKTB 激光器工控PLC系统

All claims arising from shipping damage shall be submitted to the carrier, and a full report submitted shall be sent to the Customer Service Department of GE Fanuc Embedded Systems with a request for: recommendations on the disposal of damaged items.

Warning: Some component products assembled on GE Fanuc embedded systems may be sensitive to electrostatic discharge and may cause damage to the circuit board which is subjected to high energy electrostatic fields.

When the board is placed on the board configuration table, etc., it is recommended to insert conductive material underneath the board to provide conductive shunt.

Unused circuit boards should be stored in the same location as the protective boxes used when transported. The VMIVME-7807/VME-7807RC is system run tested and comes with factory configured jumpers and switches.

2213-75TSLKTB 激光器工控PLC系统

型号推荐

ABB DCS GD C806 B01 ABB GJR5132200R0001 35AB90 可编程控制器模块

ABB DCS UC C922 A ABB 07ZE40 gjr2268800r22 通道，本安型模拟输出

ABB DCS UF C911 B101 ABB GJR2359200R0850 CC1模块

ABB DCS UD C920 BE101 ABB 07YS40 gjr2268700r1 变压器

ABB DCS UFD402A101 ABB GJR5132200R0001 / 35AB90 魏德米勒

ABB DCS UD C920 BE102 ABB GJR5142600R0001 35EB91B 通讯器

ABB DCS UA D155 A0111 ABB GJR5215100R1 POWER SUPPLY BOARD 求教器

ABB DCS DD C779 CE102 ABB GJR5215200R0001 07TI81 开关电源

ABB DCS PC D237 A101 ABB 07XS40 E gjr2268600r1 PLC模块