DANAHER FSA80 放大器 提高信号处理器产生更高的性能

DANAHER FSA80 放大器  提高信号处理器产生更高的性能

DANAHER FSA80 放大器  提高信号处理器产生更高的性能

FSA80该放大器中的电子元件经过设计加固，以降低静态灵敏度。但是，处理时应使用适当的程序。从运输集装箱中取出所有包装材料和设备。请注意，一些连接器套件和其他设备部件可能非常小，如果在拆包设备时不小心，可能会被意外丢弃。

在检查装箱单之前，不要处理运输材料。收到设备后，检查部件以确保在运输过程中没有发生损坏。如果发现损坏，应立即通知承运人。检查连接器套件、手册、磁盘和其他小型设备的所有运输材料。

FSA80安装任何电子控制系统的环境都可能影响其运行。Danaher Motion建议SERVOSTAR系统在产品规格表中规定的环境条件下运行和储存。该系统可以在应用降额的较高温度环境条件下运行。联系Danaher Motion C.2客户支持以获取降额信息。注意正确的安装和现场接线对于确保长期无故障运行至关重要。

DANAHER FSA80 放大器  提高信号处理器产生更高的性能

FSA80 The electronics in this amplifier are engineered to reduce static sensitivity. However, proper procedures should be used when handling. Remove all packaging materials and equipment from shipping containers. Note that some connector kits and other device parts can be very small and can be accidentally discarded if you are not careful when unpacking the device.

Do not handle shipping materials before checking the packing list. After receiving the device, inspect the parts to ensure that no damage occurred during transportation. If any damage is found, the carrier shall be notified immediately. Check all shipping materials for connector kits, manuals, disks, and other small devices.

The environment in which any electronic control system is installed in the FSA80 may affect its operation. Danaher Motion recommends that SERVOSTAR systems be operated and stored under the environmental conditions specified in the product specification sheet. The system can operate in higher temperature ambient conditions where derating is applied. Contact Danaher Motion C.2 Customer Support for derating information. Note that proper installation and field wiring are essential to ensure long-term trouble-free operation.