V4550220-EN ALSTOM 阿尔斯通EPIC II ESP控制器

V4550220-EN ALSTOM 阿尔斯通EPIC II ESP控制器

V4550220-EN ALSTOM 阿尔斯通EPIC II ESP控制器

产品说明

如果电机存放在潮湿或炎热的地方，其部件可能损坏或变质。此外，保持电机处于其轴保持水平且接线盒位于的位置顶部。-不要从电机上取下铭牌。如果铭牌脱落，小心不要丢失。

如果铭牌电机丢失，无法识别，导致维护变得不可能。对于内置主轴电机的铭牌，请保留铭牌使用主轴。

-不要对电机施加冲击或造成划痕。如果电机受到冲击或刮伤，其部件可能受到不利影响，导致正常运行受损。处理塑料部件、传感器、和绕组，因为它们很容易断裂。尤其地避免通过拉动电机的塑料部分、绕组或电源电缆。

-不要对探测器这样的测试可能会损坏探测器中的元件。-测试电机绕组或绝缘电阻时，满足IEC34规定的条件。在比IEC34可能损坏电机。

-不要拆解电机。拆卸电机可能会导致电机故障。如果由于维护或维修需要拆卸，请联系FANUC的服务代表。

-不要改装电机。除非FANUC指示，否则不得改装电机。修改电机可能会导致故障或故障。

V4550220-EN ALSTOM 阿尔斯通EPIC II ESP控制器

Product description

If the motor is stored in a humid or hot place, its components may be damaged or deteriorated. In addition, keep the motor on top of the position where its shaft remains level and the junction box is located. - Do not remove the nameplate from the motor. If the nameplate falls off, be careful not to lose it.

If the nameplate motor is lost, it cannot be recognized, resulting in maintenance becoming impossible. For nameplates with built-in spindle motors, keep the nameplate for use with the spindle.

- Do not impact or cause scratches to the motor. If the motor is impacted or scratched, its components may be adversely affected, resulting in impaired normal operation. Deal with plastic parts, sensors, and windings as they can break easily. In particular, avoid pulling on plastic parts of the motor, windings, or power cables.

- Do not test the detector in such a way that it may damage the components in the detector. - When testing motor windings or insulation resistance, meet the conditions specified in IEC34. May damage the motor in comparison to IEC34.

- Do not disassemble the motor. Disassembling the motor may cause motor failure. If disassembly is required for maintenance or repair, please contact a FANUC service representative.

- Do not modify the motor. Do not modify the motor unless instructed by FANUC. Modifying the motor may cause failure or malfunction.