AEM402-4 LYNGSO MARINE 模拟量输入模块

AEM402-4 LYNGSO MARINE 模拟量输入模块

AEM402-4 LYNGSO MARINE 模拟量输入模块

产品细节

如果使用暖机/额定转速,则控制转速可以是暖机;如果使用顺序自动启动，则为低暖机;

如果没有使用暖机/额定转速或顺序自动启动,则为控制器的下限转速控制器下限转速。可从505键盘、外部触点或通过Modbus通信发出“运行”指令。如果预设了“外部运行”触点,则在该触点闭合时发出“运行”指令。

由于该信号与任何物理运动或变形无关，因此传感器将灵敏度与出色的过载耐受性相结合,几乎没有内置的负载数量限制。

这些接口可用于测量流量、温度和压力，并可用于控制电压或电流输出设备。包括使用任意数量的用户内存的自动定位符号变量、VME模块支持、测试编辑模式,即使在程序运行时,用户也可以轻松测试修改、bit-in -word引用和三个不同的串行端口。

AEM402-4 LYNGSO MARINE 模拟量输入模块

Product details

If warm/rated speed is used, the control speed can be warm; If sequential automatic start is used, it is a low heating machine;

Lower limit speed of the controller if the warm up/rated speed is not used or the system starts automatically in sequence. The "Run" command can be issued from the 505 keyboard, external contacts, or via Modbus communication. If an "external run" contact is preset, a "Run" command is issued when the contact is closed.

Since this signal is not associated with any physical movement or deformation, the sensor combines sensitivity with excellent overload tolerance, with almost no built-in load number limit.

These interfaces can be used to measure flow, temperature and pressure, and can be used to control voltage or current output devices. Includes automatic positioning symbol variables using any amount of user memory, VME module support, test editing mode that allows users to easily test modifications even when the program is running, bit-in-word references, and three different serial ports.