LG1093AA24 261A1812P012|紫外线火焰传感器

Honeywell LG1093AA24 261A1812P012 是一款高性能的紫外线火焰传感器，专为检测火焰产生的紫外线辐射而设计。 它广泛应用于工业火灾报警、燃烧监测等领域，以确保生产过程的安全性和可靠性。

紫外线火焰传感器的工作原理是基于火焰在燃烧过程中会产生大量的紫外线辐射。 传感器内部的紫外线探测器会对这些紫外线辐射进行检测，并将其转换为电信号。 当检测到紫外线信号强度超过设定阈值时，传感器就会发出报警信号。

产品特点

高灵敏度: 对紫外线辐射具有极高的灵敏度，能够快速准确地检测到火焰。

宽光谱响应: 能够检测到不同波长的紫外线，提高检测的可靠性。

抗干扰能力强: 具有良好的抗干扰能力，不易受到环境光、电磁干扰等因素的影响。

寿命长: 采用高品质的材料和工艺，具有较长的使用寿命。

安装方便： 结构简单，安装方便。

应用场景

工业火灾报警: 用于检测工业生产过程中的火灾，及时发出报警。

燃气燃烧监测: 用于监测燃气燃烧是否正常，防止燃烧不完全。

锅炉火焰监测: 用于监测锅炉火焰状态，确保燃烧效率。

隧道火灾报警: 用于检测隧道内的火灾，保障行车安全。

技术参数（典型值）

检测波长范围：185-260nm

响应时间： 毫秒级

输出信号： 数字信号

工作温度： -40°C~+85°C

防护等级：IP65防护等级

LG1093AA24 261A1812P012|紫外线火焰传感器

Honeywell LG1093AA24 261A1812P012 is a high-performance UV flame sensor designed to detect UV radiation from flames. It is widely used in industrial fire alarm, combustion monitoring and other fields to ensure the safety and reliability of the production process.

The working principle of the UV flame sensor is based on the fact that the flame will produce a large amount of UV radiation during the combustion process. An ultraviolet detector inside the sensor detects this ultraviolet radiation and converts it into an electrical signal. When the UV signal intensity is detected to exceed the set threshold, the sensor will issue an alarm signal.

Product characteristics

High sensitivity: Extremely high sensitivity to ultraviolet radiation, enabling rapid and accurate flame detection.

Wide spectral response: different wavelengths of UV can be detected to improve the reliability of detection.

Strong anti-interference ability: It has good anti-interference ability and is not easily affected by environmental light, electromagnetic interference and other factors.

Long life: The use of high-quality materials and processes, with a long service life.

Easy installation: simple structure, easy installation.

Application scenario

Industrial fire alarm: used to detect the fire in the industrial production process, timely alarm.

Gas combustion monitoring: used to monitor whether the gas combustion is normal, to prevent incomplete combustion.

Boiler flame monitoring: used to monitor the boiler flame status to ensure combustion efficiency.

Tunnel fire alarm: used to detect the fire in the tunnel to ensure driving safety.

Technical parameters (typical values)

Detection wavelength range: 185-260nm

Response time: milliseconds

Output signal: digital signal

Operating temperature: -40°C~+85°C

Protection level: IP65 protection level