7DO135.70 B&R贝加莱 数字量输入模块

7DO135.70 B&R贝加莱 数字量输入模块

B&R 7DO135.70复位开关和信号器-A小前面板上的按钮开关将重置VMIVME-7697。如果系统控制器启用系统重置*也将在VMEbus上生成。五前面板上的LED可见：+5 V电源，状态为VMEbus系统故障、IDE活动、LAN活动和LAN模式（10或100MHz模式）。

还需要一个小型扬声器包括在VMIVME-7697上，以提供PC/AT声音outputPMC扩展站点-VMIVME-7697支持IEEE P1386通用夹层卡规范具有5V PCI夹层卡扩展站点。这种扩展该功能允许第三方设备与VMIVME-7697。

以下是部分市售产品列表PMC模块：光纤通道反思性记忆模拟和数字I/O高速串行和并行I/O网络适配器：FDDI、ATM、10BaseT、100BaseTX以太网，快速以太网PMC到PC卡适配器MIL-STD-1553总线接口SRAM闪光固态磁盘数据采集卡SCSI-2适配器并行链路八进制DSP四方SIOGPIB传真/调制解调器第二以太网PMC至PMC扩展器有关更多信息，请联系VMIC第三方PMC模块和兼容性。

B&R 7DO135.70 Reset switch and Signaler -A push-button switch on the small front panel will reset the VMIVME-7697. If the system controller enables system reset * will also be generated on VMEbus. The LED on the five front panels is visible: +5 V power supply, status is VMEbus system Failure, IDE Active, LAN Active, and LAN mode (10 or 100MHz mode).

A small speaker is also required to be included on the VMIVME-7697 to provide PC/AT sound on the outputPMC extension site - the VMIVME-7697 supports the IEEE P1386 Universal Sandwich Card specification with a 5V PCI Sandwich card extension site. This extension of the functionality allows third party devices to work with the VMIVME-7697.

The following is a partial list of commercially available products PMC Modules: Fibre Channel Reflective Memory Analog and Digital I/O High-speed serial and parallel I/O Network Adapters: FDDI, ATM, 10BaseT, 100BaseTX Ethernet, Fast Ethernet PMC to PC card adapter MIL-STD-1553 bus interface SRAM Flash Solid State Disk Data Acquisition Card SCSI-2 Adapter Parallel Link Octal DSP Quad SIOGPIB Fax/Modem Second Ethernet PMC to PMC Expander For more information, Please contact VMIC third party PMC module and compatibility.