216DB61 数字量控制模块 用于监测和控制数字信号

216DB61 数字量控制模块 用于监测和控制数字信号

作用火灾报警时，报警控制器通过输出模块启动需要联动的外控设备,如防排烟阀、送风阀、防火卷帘门、风机、警铃  等，并可接受设备的动作回答。  输出模块连接在控制器的回路总线上，可以安装在所控设备的附近，也可安装在楼层端子模块箱内。

采用电子写码，可  以现场编码。输出模块的输出控制逻缉可以根据工程情况编程完成。当控制器接收到探测器的报警信号后,根据预先  编入的程序,控制器通过总线将联动控制信号输送到输出模块，输出模块启动需要联动的消防设备;设备动作后会接  受一个信号回答。

励磁控制： 该系统卡用于控制电力发电机的励磁系统，以确保发电机的电磁场得到适当的励磁，从而稳定输出电压。 

 监控功能： 216DB61卡通常具有监控电力发电机的励磁状态，包括电流、电压和励磁系统的性能参数。  保护功能： 该卡可能包含保护功能，以监测和响应励磁系统的异常情况，例如电流过载或短路。  

通信接口： 一些励磁系统卡具有通信接口，以便与发电机控制系统或监控系统进行数据交换和远程监控。

216DB61 数字量控制模块 用于监测和控制数字信号

When the fire alarm occurs, the alarm controller starts the external control equipment that needs to be linked through the output module, such as smoke exhaust valve, air supply valve, fire shutter door, fan, alarm bell, etc., and can accept the action of the equipment. The output module is connected to the loop bus of the controller and can be installed near the control device or in the floor terminal module box.

Using electronic coding, can be coded in the field. The output control logic of the output module can be programmed according to the project situation. When the controller receives the alarm signal of the detector, according to the pre-programmed program, the controller transmits the linkage control signal to the output module through the bus, and the output module starts the fire fighting equipment that needs linkage; The device will receive a signal response after the action.

Excitation control: The system card is used to control the excitation system of the power generator to ensure that the electromagnetic field of the generator is properly excited, thus stabilizing the output voltage.

Monitoring function: The 216DB61 card usually has the ability to monitor the excitation status of the power generator, including current, voltage and excitation system performance parameters. Protection features: The card may contain protection features to monitor and respond to abnormal conditions in the excitation system, such as current overload or short circuit.

Communication interface: Some excitation system cards have a communication interface for data exchange and remote monitoring with the generator control system or monitoring system.