YPQ110A 3ASD573001A5 励磁控制板 有两行水平行的LED

YPQ110A 3ASD573001A5 励磁控制板 有两行水平行的LED

YPQ110A分立模块.上每个/0点的电路状态由安装在模块的顶部，可通过透明塑料镜头查看。有两行水平行的LED,每行有110个LED。YPQ<>A 每个指示灯由字母和数字标识当适用的LED亮起时亮起的标识。这些信件和字清楚地标识每个LED,以协助程序监控和故障排除。这顶行标记为A1到8，底行标记为B1到8。

YPQ110A此外，熔断或电子保护输出模块的熔断保险丝状态为由LED护盖上标有F的LED提供(请注意, F在所有离散I/0.上都标有F模块,尽管它仅与熔断或电子保护的输出模块相关)。

前门插件YPQ110A每个模块都有一个嵌件， 用于铰链i ]的内表面和外表面之间。朝向模块内部的表面(当铰链门关闭时)有环形该模块类型的接线信息，并粗外表面有空间记录电路标识信息。刀片的左外边缘采用颜色编码，以便您可以快速将模块识别为AC (红色)、DC (蓝色)或信号电平(灰色)类型。

YPQ1 10A通用端子板90-30系列/0模块最多16个，标配可拆卸端子盱与用户提供的输入或输出设备进行现场接线连接的电路板。这功能使得将现场接线预接线到用户提供的输入和输出设备,以吸在现场更换模块，而不会干扰现有的现场接线。 

YPQ110A 3ASD573001A5 励磁控制板 有两行水平行的LED

YPQ110A Discrete module. The circuit status on each /0 point is mounted on the top of the module and can be viewed through a clear plastic lens. There are two horizontal rows of leds, each row has 110 leds. YPQ<>A Each indicator is identified by a letter and number the identifier that lights up when the applicable LED lights up. These letters and words clearly identify each LED to assist in program monitoring and troubleshooting. The top rows are labeled A1 through 8, and the bottom rows are labeled B1 through 8.

YPQ110A In addition, the fuse status of the fuse or electronic protection output module is provided by the LED labeled F on the LED cover (note that F is in all discrete I/0. The F module is marked on both, although it is only associated with fusing or electronically protected output modules).

Front door plug-in YPQ110A Each module has an insert for use between the inner and outer surfaces of the hinge i]. The surface towards the inside of the module (when the hinged door is closed) has a ring for the wiring information of the module type, and the thick outer surface has a space to record circuit identification information. The left outer edge of the blade is color-coded so that you can quickly identify the module as an AC (red), DC (blue), or signal level (gray) type.

YPQ1 10A Universal terminal board 90-30 series /0 modules up to 16, standard with detachable terminals and circuit boards for field wiring to user-supplied input or output devices. This feature enables field wiring to be pre-wired to user-supplied input and output devices to suck in field replacement modules without interfering with existing field wiring.