ABB O3EEb HENF318176R1 可增强机器人编程和仿真软件

ABB O3EEb HENF318176R1 可增强机器人编程和仿真软件

ABB O3EEb HENF318176R1数字I/O模块要与NGPS电源单元通信，必须设置其IP地址。

该操作可以通过使用模块IP地址窗口进行单击Visual PS工具栏的第一个“Set IP”图标。要建立与模块的连接，需要单击“连接”图标。一旦建立了通信，就可以配置单元控制：允许打开/关闭单元并其状态寄存器（如果出现故障）。

•调节模式：允许选择操作模式。可用的模式有：“恒压”模式或“恒流”模式。这个只有当装置关闭时，才能改变调节模式。

ABB O3EEb HENF318176R1 可增强机器人编程和仿真软件

For the ABB O3EEb HENF318176R1 digital I/O module to communicate with the NGPS power unit, its IP address must be set.

This can be done by clicking the first "Set IP" icon in the Visual PS toolbar using the Module IP Address window. To establish a connection to the module, click the Connect icon. Once communication is established, cell control can be configured: allowing the cell to be turned on/off and its status register (in case of failure).

• Adjustment mode: Allows selection of operation mode. The available modes are: "Constant voltage" mode or "constant current" mode. The adjustment mode can only be changed when the device is turned off.