AFPS-11C ABB电源板模块瑞士

AFPS-11C ABB电源板模块瑞士

AFPS-11C ABB电源板模块瑞士

AFPS-11C变频电源的安装应该注意以下几点:

1、调速时平滑性好，。低速时，特性静关率较高，相对稳定性好。

2、变频器的使用环境温度一般适用在-10°℃~40℃，湿度在低于90的环境工作中。环境温度若40°C时候，每升高1℃，变频器应降额5使用。环境温度每升10℃，则变频器寿命减半，所以周围环境温度及变频器散热的问题一定要解决好。

3、变频变压电源、变压稳压电源等—切电源产品都应该远离火源及高温，以防温度过高。

4、防止油雾、盐分对变频电源的侵蚀。

5、请将变频电源置于通风良好的地方，其周围至少离其他物体30公分以保持进风孔通)风。

6、变频电源的正常运转环境为温度0℃～40℃，湿度0～90%(非凝结状态)

AFPS-11C ABB电源板模块瑞士

AFPS-11C frequency conversion power supply installation should pay attention to the following points:

1. Good smoothness when regulating speed. At low speed, the characteristic static closing rate is high and the relative stability is good.

2. The ambient temperature of the frequency converter is generally suitable for -10° C ~40 ° C, and the humidity is below 90 in the environment. When the ambient temperature is 40°C, the frequency converter should be derated 5 for every 1 °C increase. The ambient temperature is 10 ° C per liter, then the life of the inverter is halved, so the problems of the surrounding ambient temperature and the heat dissipation of the inverter must be solved.

3, variable frequency voltage power supply, variable voltage regulator power supply and other - cutting power products should be away from the fire source and high temperature, to prevent the temperature is too high.

4. Prevent oil mist and salt from eroding the inverter power supply.

5, please put the frequency conversion power supply in a well-ventilated place, at least 30 cm away from other objects around it to keep the air inlet hole open.

6, the normal operating environment of the inverter power supply is 0℃ ~ 40℃, humidity 0 ~ 90%(non-condensing state)