咨询电话:17359299796
手机:17359299796
联系我们/ CONTACT US
全国免费客服电话 17359299796
漳州风云电气

邮箱:A3669372910@163.com

手机:17359299796

电话:17359299796

地址:福建省漳州市龙文区朝阳北路1号办公楼205室

您的位置: 漳州风云 > 产品中心 > ABB

SPBRC410 SPBRC400 桥控制器 断续器410 ABB贝利 Bailey

SPBRC410 SPBRC400 桥控制器 断续器410 ABB贝利 Bailey品牌ABB规格101.6*254*203.2颜色绿色特点控制器加工定制否物料编码SPBRC410输出频率60系统环境常温系统能力强大操作系统PLC系统系统功能自动是否进口否产地美国可售卖地全国用途断续器410型号SPBRC410SPBRC410 SPBRC400 桥控制器 断续器410 ABB贝利 BaileySP

立即咨询立即咨询

咨询电话 :17359299796

微信:17359299796邮箱:A3669372910@163.com

产品详情

SPBRC410 SPBRC400 桥控制器 断续器410 ABB贝利 Bailey

品牌
ABB
规格
101.6*254*203.2
颜色
绿色
特点
控制器
加工定制
物料编码
SPBRC410
输出频率
60
系统环境
常温
系统能力
强大
操作系统
PLC系统
系统功能
自动
是否进口
产地
美国
可售卖地
全国
用途
断续器410
型号
SPBRC410

SPBRC410 SPBRC400 桥控制器 断续器410 ABB贝利 Bailey

SPBRC410过程控制级具体实现了信号的输入、变换、运算和输出等分散控制功能。在不同的DCS中,过程控制级的控制装置各不相同,如过程控制单元、现场控制站、过程接口单元等等,但它们的结构形式大致相同,可以统称为现场控制单元FCU。


SPBRC410过程管理级由工程师站、操作员站、管理计算机等组成,完成对过程控制级的集中监视和管理,通常称为操作站。DCS的硬件和软件,都是按模块化结构设计的,所以DCS的开发实际上就是将系统提供的各种基本模块按实际的需要组合成为一个系统,SPBRC410这个过程称为系统的组态。


SPBRC410现场控制单元一般远离控制中心,安装在靠近现场的地方,其高度模块化结构可以根据过程监测和控制的需要配置成由几个监控点到数百个监控点的规模不等的过程控制单元。SPBRC410现场控制单元的结构是由许多功能分散的插板(或称卡件)按照一定的逻辑或物理顺序安装在插板箱中,各现场控制单元及其与控制管理级之间采用总线连接,以实现信息交互。


SPBRC410现场控制单元的硬件配置需要完成以下内容:插件的配置 根据系统的要求和控制规模配置主机插件(CPU插件)、电源插件、I/O插件、通信插件等硬件设备;

SPBRC410.jpg

SPBRC410 SPBRC400 桥控制器 断续器410 ABB贝利 Bailey

SPBRC410 process control level realizes the decentralized control functions of signal input, transformation, operation and output. In different DCS, the control devices of the process control level are different, such as process control unit, field control station, process interface unit, etc., but their structural form is roughly the same, and they can be collectively referred to as field control unit FCU.


SPBRC410 process management level is composed of engineer station, operator station, management computer, etc., to complete the centralized monitoring and management of process control level, usually called operation station. The hardware and software of DCS are designed according to the modular structure, so the development of DCS is actually to combine the various basic modules provided by the system into a system according to actual needs, SPBRC410 this process is called the configuration of the system.


The SPBRC410 field control unit is generally located away from the control center and installed near the site, and its highly modular structure can be configured into process control units ranging in size from a few monitoring points to hundreds of monitoring points according to the needs of process monitoring and control. The structure of the SPBRC410 field control unit is composed of a number of decentralized boards (or cards) installed in the board box according to a certain logical or physical sequence, and the bus connection between each field control unit and its control management level is adopted to realize information exchange.


The hardware configuration of the SPBRC410 onsite control unit must be as follows: Plug-in configuration Configure hardware devices such as host plug-ins (CPU plug-ins), power plug-ins, I/O plug-ins, and communication plug-ins based on system requirements and control scale.



标签: SPBRC410

相关推荐

在线客服
服务热线

服务热线

tel:17359299796

微信咨询
漳州风云电气
返回顶部
X漳州风云电气

截屏,微信识别二维码

微信号:17359299796

(点击微信号复制,添加好友)

  打开微信

微信号已复制,请打开微信添加咨询详情!