ABB模块 3HAB8101-19 DSQC545A

ABB模块 3HAB8101-19 DSQC545A 

ABB模块 3HAB8101-19 DSQC545A 

用于负载的24v直流电源应连接到0v或24v直流电源上。

位于顶部或底部端子座上的端子。这些端子在内部连接，因此它只需要连接一个0v和一个24v直流端子

警告:端子O V断开，同时接24v dc时，输出漏电流为16ma。

根据传感器类型，输入的公共C必须连接到0v或24v直流。

负载使用的24v直流电源应连接在顶部或底部端子排上的0v或24v直流端子上。这些端子在内部连接，因此它只需要连接一个0v和一个24v直流端子

ABB模块 3HAB8101-19 DSQC545A 

The 24v DC power supply for the load should be connected to the 0v or 24v DC power supply.

Terminals located on top or bottom terminal blocks. These terminals are connected internally, so it only needs to connect one 0v and one 24v DC terminal

Warning: When terminal O V is disconnected and 24v dc is connected at the same time, the output leakage current is 16ma.

Depending on the sensor type, the input common C must be connected to 0v or 24v DC.

The 24v DC power supply used by the load should be connected to the 0v or 24v DC terminals on the top or bottom terminal block. These terminals are connected internally, so it only needs to connect one 0v and one 24v DC terminal