PFSK130进口ABB模块DCS/PLC系统备件

PFSK130进口ABB模块DCS/PLC系统备件

PFSK130进口ABB模块DCS/PLC系统备件

励磁控制器的控制方式主要有：自适应模式控制(AutomaticMulti-TimeMulti-Charge)、无功补偿和过负荷补偿。励磁控制系统可分为无功控制系统(EMI)和无功补偿系统(DMTC)。

其中 EMI主要由无功功率补偿器件组成，采用无功功率法进行补偿; DMTC则主要是采用电流互感器进行补偿，通常采用三相补偿或两相半补偿方式进行补偿; DMTC常用于一些不需要频繁起动或无功电流不足的场合，但如果有超过励磁电流频率较高的场合；

而 DMTC是一种由三相补偿组成的整流驱动装置，可用于电流谐波含量较低的场合时进行控制；同时，随着控制技术的发展和应用范围的扩大，现在 DMTC已基本取代传统无功补偿装置而应用于无功补偿方面；目前 ABB生产环境较为复杂；

所以使用寿命比较短；对功率因数较低、电流谐波含量较高且频率较高的场合则不能采用 FCWS系统进行补偿方案了；需要控制励磁电流的环境参数如：磁通密度等；需要对无功补偿的场合：如风机、发电机等；需要对励磁电流频率的应用场合：如电机、电动机控制器等。通过上述控制手段来达到控制无功、电流和频率的目的。励磁控制系统由励磁调节电路和励磁通量显示调节器构成。其中励永磁交流驱动器起驱动作用。

The main control modes of excitation controller are: adaptive mode control (automatic multi-timemulti-charge), reactive power compensation and overload compensation. Excitation control system can be divided into reactive power control system (EMI) and reactive power compensation system (DMTC).

EMI is mainly composed of reactive power compensation devices, which are compensated by reactive power method. DMTC is mainly compensated by current transformer, usually by three-phase compensation or two-phase semi-compensation. DMTC is often used in some occasions that do not require frequent starting or insufficient reactive current, but if there is a higher frequency of excitation current;

DMTC is a kind of rectifier drive device composed of three-phase compensation, which can be used to control the current harmonic content in the case of low; At the same time, with the development of control technology and the expansion of application range, DMTC has basically replaced the traditional reactive power compensation device and applied in reactive power compensation. At present, ABB's production environment is relatively complex;

So the service life is relatively short; When the power factor is low, the current harmonic content is high and the frequency is high, the FCWS system can not be used to compensate the scheme. Need to control the excitation current of the environment parameters such as: magnetic flux density; Need to compensate for reactive power occasions: such as fans, generators, etc.; Need to field current frequency applications: such as motor, motor controller, etc. The purpose of controlling reactive power, current and frequency is achieved by the above control means. The excitation control system is composed of the excitation regulating circuit and the excitation flux display regulator. The excitation permanent magnet AC driver plays the driving role.