DSAI130A模拟量扩展模块ABB

DSAI130A模拟量扩展模块ABB

DSAI130A模拟量扩展模块ABB

1、设备投资成本的节省

双轴驱动单元使成本得到了控制。当轴数达到10个以上时，它能够给客户带来惊人的成本节约。由于POWERLINK实时工业以太网成为标准的配置，使得轴的刷新速度达到了异乎寻常的高速。

2、能量的节省

由于功率因素达到近乎1的设计水平使得机器的能量输入得到了充分的发挥，反馈电流可以通过直流单元回馈电网,因此,对于能源的节约贡献也是巨大的。

3、安装空间的节省

较之传统的驱动器而言, 节省了电柜空间,当达到10个轴以上时,它能够节省20％的空间、40个轴时可以节省多达40％的空间。

4、消除电源对系统的影响

800VDC直流母线单元采用闭环控制,可以接受大幅度的电源范围变化,从230VAC~500VAC的输入范围使得在电源环境恶劣的区域都可以正常稳定的工作，尤其在中国市场,电源的稳定性是一个大问题,而在设计之初便考虑到了这个问题。

1. Saving of equipment investment cost

The two-axle drive unit keeps costs under control. When the number of shafts reaches more than 10, it can bring customers amazing cost savings. As POWERLINK real-time Industrial Ethernet became standard, the axle refresh rate reached an unusually high speed.

2. Energy saving

Because the power factor reaches the design level of nearly 1, the energy input of the machine is fully played, and the feedback current can be fed back to the grid through the DC unit, so the contribution to energy saving is also huge.

3. Saving installation space

Compared with traditional drives, it saves electrical cabinet space, when reaching more than 10 axes, it can save 20% of the space, and when 40 axes can save up to 40% of the space.

4. Eliminate the influence of power supply on the system

800VDC DC bus unit adopts closed-loop control, can accept large power range changes, from 230VAC to 500VAC input range, can work normally and stably in the area of poor power environment, especially in the Chinese market, the stability of the power supply is a big problem, and at the beginning of the design took into account this problem.