DSPC174 3BSE005461R1欧美备件 CPU模块 PLC控制器 俄罗斯能源

DSPC174 3BSE005461R1欧美备件 CPU模块 PLC控制器 俄罗斯能源

DSPC174 3BSE005461R1这将启用或禁用集成本地总线IDE适配器。选项包括：禁用、主要、次要或两者兼有。默认值为“两者”。此功能增加了BIOS首次访问硬盘之前的延迟。一些硬的如果在初始化之前访问磁盘，则会出现故障。这次耽搁确保硬盘在通电后但在被访问之前已初始化。这个默认值为30秒。

如果启用，请关闭系统RAM以释放地址空间，以便与选项卡一起使用。一个128KB的传统内存gag，从512KB开始，或者一个1MB扩展内存gag从15MB开始的内存间隙将在系统RAM中创建。

选项包括禁用、常规或扩展。默认设置为禁用。如果系统中的所有内存都支持ECC（x72），ECC配置将从无ECC中选择（禁用）、仅检查（EC）、检查和校正（ECC）或检查，通过擦洗进行校正（ECC擦洗）。默认设置为禁用。SERR信号配置选择SERR将被断言的ECC错误条件。选项有：无、单个位、多位或两者。默认值为“两者”。

DSPC174 3BSE005461R1 This enables or disables the integrated local Bus IDE adapter. Options include: Disabled, major, minor, or both. The default value is both. This feature increases the latency before the BIOS accesses the hard drive for the first time. Some hard disks will fail if they are accessed before initialization. This delay ensured that the hard drive was initialized after it was powered on but before it was accessed. The default value is 30 seconds.

If enabled, turn off system RAM to free up address space for use with tabs. A 128KB conventional memory gag, starting at 512KB, or a 1MB extended memory gag with a memory gap starting at 15MB will be created in system RAM.

Options include disabled, General, or extended. The default setting is disabled. If all memory in the system supports ECC (x72), the ECC configuration is selected from no ECC (disabled), Check only (EC), Check and correct (ECC), or Check, Correct by scrubbing (ECC scrubbing). The default setting is disabled. The SERR signal configuration selects the ECC error condition for which the SERR will be asserted. The options are none, single bit, multiple bit, or both. The default value is both.