DSCA114 ABB模块 优势供应 全系列原厂直供57510001-AA

DSCA114 ABB模块 优势供应 全系列原厂直供57510001-AA

DSCA114 57510001-AA当Windows 95在安装后第一次重新启动时，新的出现硬件找到对话框窗口。从提供的磁盘中选择驱动程序按制造商，单击“确定”。当出现“从磁盘安装”窗口时，插入VMIC驱动程序磁盘320-500037-005放入驱动器A中，并确保A:\在副本制造商的文件中来自方框。单击“确定”。

按照屏幕上的提示完成安装。在控制面板中，双击网络图标。在“网络”下，单击“文件和打印共享”，然后选择适当的项目，单击“确定”。在网络窗口中，单击确定。出现提示时，插入所需的磁盘如有需要，完成网络安装。当系统提示您重新启动计算机时，单击Yes（是）以要生效的网络设置

验证Windows 95是否实际使用芯片驱动程序。打开Windows 95控制面板。双击显示图标。单击“设置”选项卡。检查适配器/驱动程序信息：对于Win95a，选择更改显示类型。对于Win95b，选择高级属性。如果驱动程序安装并运行正常，则芯片和技术设备在适配器类型框中指定Windows NT 4.0包括车载LAN和视频适配器的驱动程序。这个需要执行以下步骤来配置LAN以进行操作。按照正常的Windows NT 4.0安装，直到到达WindowsNT工作站设置窗口，其中说明Windows NT需要了解此计算机应如何参与网络。

DSCA114 57510001-AA When Windows 95 reboots for the first time after installation, a new Hardware Find dialog window appears. Select the driver from the provided disk by manufacturer and click OK. When the "Install from Disk" window appears, insert VMIC driver disk 320-500037-005 into drive A and make sure that A:\ comes from the box in the copy manufacturer's file. Click OK.

Follow the on-screen prompts to complete the installation. In the Control Panel, double-click the network icon. Under Network, click File and Print Sharing, then select the appropriate project, and click OK. In the network window, click OK. When prompted, insert the required disk if necessary to complete the network installation. When you are prompted to restart your computer, click Yes for the network Settings to take effect

Verify that Windows 95 actually uses a chip driver. The Windows 95 Control Panel is displayed. Double-click the display icon. Click the Settings TAB. Check adapter/driver information: For Win95a, select Change display type. For Win95b, select Advanced properties. If the driver is installed and running properly, the chip and technology devices specify in the adapter type box that Windows NT 4.0 includes drivers for the on-board LAN and video adapter. This requires the following steps to configure the LAN for operation. Follow normal WindowsNT 4.0 installation until you reach the WindowsNT Workstation Setup window, which states that WindowsNT needs to know how this computer should participate in the network.