ABB DSBC172 57310001-KD全新现货DCS控制系统电源模块

ABB DSBC172 57310001-KD全新现货DCS控制系统电源模块

DSBC172 57310001-KD VMIVME-7698提供高性能视频和局域网（LAN）通过基于PCI的车载适配器和相关软件驱动程序进行访问。这个VMIVME-7698上使用的基于PCI的视频适配器是Intel 69000。高性能LAN操作，包括10BaseT和100BaseTx，由Intel 82559以太网控制器芯片。为了优化每个基于PCI的子系统的性能，VMIVME-7698提供与DOS、Windows 95和Windows NT兼容的软件驱动程序操作系统。以下段落提供了装载和安装适配器软件。

为了正确使用VMIVME-7698的视频和LAN适配器，用户必须安装位于随附的分发磁盘上的驱动程序软件装置。在安装过程中安装驱动程序的详细说明中介绍了Windows 95或Windows NT（4.0版）操作系统以下部分。用MS-DOS格式化硬盘。

按照提供的说明开始安装Windows 95手册。在Windows 95安装向导屏幕上，选择“安装选项”下的“典型”然后单击“下一步”。在分析计算机屏幕时，在框中放置一个X，用于网络适配器，然后单击下一步。在Windows组件屏幕下，选择安装最常见的组件组件，然后单击下一步。继续安装，直到Windows 95完全安装并重新启动

DSBC172 57310001-KD VMIVME-7698 provides high-performance video and local area network (LAN) access via PCI-based on-board adapters and associated software drivers. The PCI-based video adapter used on this VMIVME-7698 is Intel 69000. High-performance LAN operations, including 10BaseT and 100BaseTx, powered by Intel 82559 Ethernet controller chips. To optimize the performance of each PCI-based subsystem, VMIVME-7698 offers a software-driver operating system compatible with DOS, Windows 95, and Windows NT. The following sections provide the loading and installing adapter software.

In order to properly use the VMIVME-7698's video and LAN adapters, the user must install a driver software device located on the included distribution disk. The following sections of the Windows 95 or Windows NT (version 4.0) operating system are described in the detailed instructions for installing drivers during installation. Format the hard drive with MS-DOS.

Follow the instructions provided to begin installing the Windows 95 manual. On the Windows 95 Installation Wizard screen, select Typical under Installation Options and click Next. When analyzing your computer screen, place an X in the box for the network adapter and click Next. Under the Windows Components screen, select the most common component components to install, and then click Next. Continue installing until Windows 95 is fully installed and rebooted