— 产品中心 —
邮箱:A3669372910@163.com
手机:17359299796
电话:17359299796
地址:福建省漳州市龙文区朝阳北路1号办公楼205室
ABB UNS0881a-P,V1 3BHB006338R0001控制模块工控品牌ABB产品特性工控产品是否进口否产地美国加工定制否工作电压220V输出频率60kHz产品认证PLC模块DCS模块系列PLC模块DCS模块物料编码PLC模块DCS模块可售卖地全国型号UNS0881a-P,V1 3BHB006338R0001UNS0881a-P,V1 3BHB006338R0001高性能视频和Ultra
产品详情
ABB UNS0881a-P,V1 3BHB006338R0001控制模块工控
UNS0881a-P,V1 3BHB006338R0001高性能视频和Ultra ATA存储设备控制由嵌入式Intel 815E芯片组提供。二重的高性能LAN操作由Intel GD82559ER快速以太网提供适配器芯片(LAN1)和嵌入式Intel 815E芯片组(LAN2)。
两个局域网适配器可以配置为允许VMIVME-7750访问两个单独的,物理网络。每个LAN适配器都能够运行10BaseT和100BaseTx。为了优化每个基于PCI的子系统的性能,用户必须安装驱动程序软件位于随装置提供的分发CD-ROM上。安装Microsoft期间安装驱动程序的详细说明Windows 98第二版(SE)、Windows NT Workstation(NTW)4.0和Windows以下部分提供了2000个专业操作系统。
如果连接了USB键盘或USB鼠标,则本节适用。事实并非如此如果使用PS/2键盘和鼠标,则适用。Windows 98SE/Windows 2000在支持USB的操作系统上使用USB键盘/鼠标设备需要在安装之前和之后更改默认BIOS设置Windows 98SE/2000。必须在BIOS中启用“传统USB支持”,才能使用USB键盘/鼠标在安装Windows 98SE/2000期间作为PS/2设备运行。在安装完成后,计算机将重新启动并引导Windows 98SE/2000计算机正在重新启动以首次启动操作系统必须禁用“支持”,并且必须启用“为USB分配中断”。
UNS0881a-P,V1 3BHB006338R0001 High-performance video and Ultra ATA storage device control is provided by the embedded Intel 815E chipset. Dual high-performance LAN operation is provided by Intel GD82559ER Fast Ethernet adapter chip (LAN1) and embedded Intel 815E chipset (LAN2).
Two LAN adapters can be configured to allow the VMIVME-7750 to access two separate, physical networks. Each LAN adapter is capable of running 10BaseT and 100BaseTx. In order to optimize the performance of each PCI-based subsystem, the user must install the driver software on the distribution CD-ROM provided with the device. Detailed instructions for installing drivers during Microsoft installation Windows 98 2nd Edition (SE), Windows NT Workstation (NTW) 4.0 and Windows The following sections provide 2000 professional operating systems.
This section applies if a USB keyboard or USB mouse is connected. This is not the case if you are using a PS/2 keyboard and mouse. Windows 98SE/Windows 2000 Using a USB keyboard/mouse device on a USB-enabled operating system requires changing the default BIOS Settings before and after installing Windows 98SE/2000. Traditional USB Support must be enabled in the BIOS in order to use a USB keyboard/mouse to run as a PS/2 device during Windows 98SE/2000 installation. After the installation is complete, the computer will restart and boot Windows 98SE/2000 The computer is rebooting to start the operating system for the first time must disable Support and must enable Assign Interrupt for USB.
相关推荐