DI830 3BSE013210R1 自动化处理器模块

DI830 3BSE013210R1 自动化处理器模块

DI830 3BSE013210R1是ABB S800 I/O系统中用于 采集各种传感器、开关和其他设备的数字信号的数字输入模块。 它充当外部现场设备和 S800 控制器内部处理单元之间的接口，能够监控过程条件、操作员输入和系统状态。

数字输入模块的一般特性：

数字输入模块设计用于捕获和处理来自各种外部设备的数字信号，通常采用开/关或高/低电压电平的形式。 它们将这些信号转换为与控制器的数字处理单元兼容的格式，从而实现进一步的分析和决策。

数字输入模块的主要特点：

信号去抖动：数字输入模块集成了信号去抖动电路，以消除输入信号的噪声和毛刺，确保可靠和准确的数据采集。

电气隔离：它们通常提供电气隔离保护，以保护控制器的内部电路免受电气噪声的影响。可能来自现场设备的电气噪声、瞬 变以及可能源自现场设备的接地故障。

诊断功能：一些数字输入模块提供诊断功能，用于检测和报告开路，短路，和其他信号异常。

灵活配置：许多数字输入模块允许灵活配置信号极性、阈值和滤波参数，以匹配所连接设备的特定特性。

数字量输入模块的应用：

数字输入模块是各种工业自动化系统中必不可少的组件，包括：

工业控制系统：用于工业控制系统，用于监控传感器的状态，开关按钮，和其他数字设备，的状态，实现实时过程控制和安全联锁。

楼宇自动化系统：用于楼宇自动化系统，用于监控暖通空调、照明和安全系统的占用率、门状态、报警条件和其他数字输入。

过程控制系统：用于过程控制系统，用于监控阀门、泵、安全系统和其他数字设备的状态，以进行关键过程监测和控制。

运输系统：用于运输系统，用于监控车门状态、制动状态、紧急停止和其他数字输入，以实现车辆安全和控制。

医疗设备：用于医疗设备，用于监控患者参数、报警条件和操作员输入，用于患者监测、治疗交付和诊断设备。

DI830 3BSE013210R1 自动化处理器模块

DI830 3BSE013210R1 is a digital input module used in ABB S800 I/O systems to collect digital signals from various sensors, switches and other devices. It acts as an interface between the external field equipment and the S800 controller's internal processing unit, enabling monitoring of process conditions, operator input and system status.

General features of the digital input module:

Digital input modules are designed to capture and process digital signals from a variety of external devices, typically in the form of on/off or high/low voltage levels. They convert these signals into a format compatible with the controller's digital processing unit, enabling further analysis and decision making.

The main features of the digital input module:

Signal dejitter: The digital input module integrates a signal dejitter circuit to eliminate noise and burrs from the input signal, ensuring reliable and accurate data acquisition.

Electrical isolation: They typically provide electrical isolation protection to protect the internal circuits of the controller from electrical noise. Electrical noise, transients that may come from field equipment, and ground faults that may come from field equipment.

Diagnostic functions: Some digital input modules provide diagnostic functions for detecting and reporting open circuit, short circuit, and other signal anomalies.

Flexible configuration: Many digital input modules allow flexible configuration of signal polarity, thresholds, and filtering parameters to match the specific characteristics of the connected device.

Application of digital input module:

Digital input modules are essential components in a variety of industrial automation systems, including:

Industrial control systems: Used in industrial control systems to monitor the status of sensors, switch buttons, and other digital devices, enabling real-time process control and security interlocking.

Building Automation systems: Used in building automation systems to monitor occupancy, door status, alarm conditions and other digital inputs for HVAC, lighting and security systems.

Process control systems: Used in process control systems to monitor the status of valves, pumps, safety systems and other digital equipment for critical process monitoring and control.

Transport systems: For transport systems that monitor door status, braking status, emergency stops and other digital inputs for vehicle safety and control.

Medical devices: For medical devices, for monitoring patient parameters, alarm conditions, and operator input, for patient monitoring, treatment delivery, and diagnostic devices.

DI830 3BSE013210R1 自动化处理器模块