CI801 输入输出模块 传感器

CI801 输入输出模块 传感器

CI801现场总线通信接口（FCI）模块是一个可配置的通信接口，可执行信号处理、监控信息收集、OSP处理、热配置InRun、HART直通和I/O模块配置等操作。FCI 通过 PROFIBUS-DPV1 现场总线连接到控制器。

CI801 模块不直接连接到传感器。它用于与连接到传感器的其他 I/O 模块进行通信。I/O模块负责将传感器信号转换为控制器可以理解的数字信号。然后，CI801模块通过PROFIBUS-DPV1现场总线将这些数字信号传送到控制器。

以下是可以连接到 CI801 模块的 I/O 模块的一些示例：

AI801 模拟量输入模块：该模块将来自传感器（如温度传感器、压力传感器和流量传感器）的模拟信号转换为数字信号。

AO801模拟量输出模块：该模块将来自控制器的数字信号转换为模拟信号，可用于控制阀门、电机和加热器等执行器。

DI801 数字量输入模块：该模块将来自传感器（如按钮、限位开关和接近传感器）的数字信号转换为数字信号。

DO801 数字量输出模块：该模块将来自控制器的数字信号转换为可用于控制执行器（如继电器、螺线管和接触器）的数字信号。

一旦CI801模块连接到I/O模块，它就可用于配置I/O模块，监控传感器信号和控制执行器。CI801模块还可用于与PROFIBUS-DPV1网络上的其他设备进行通信，例如PLC、HMI和SCADA系统。

以下是使用 CI801 模块的一些好处：

降低安装和布线成本：CI801 模块可用于连接多达 12 个 I/O 模块，从而减少所需的布线和安装量。

提高灵活性：CI801 模块可用于连接各种 I/O 模块，让您在设计控制系统时更加灵活。

提高可靠性：CI801模块是一款坚固可靠的设备，可以承受恶劣的工业环境。

易于使用：CI801 模块易于配置和使用，即使对于 PROFIBUS-DPV1 经验有限的人也是如此。

CI801 输入输出模块 传感器

The CI801 Fieldbus Communication Interface (FCI) module is a configurable communication interface that performs operations such as signal processing, monitoring information collection, OSP processing, hot configuration InRun, HART pass-through, and I/O module configuration. The FCI is connected to the controller via the PROFIBUS-DPV1 fieldbus.

The CI801 module is not connected directly to the sensor. It is used to communicate with other I/O modules connected to the sensor. The I/O module is responsible for converting the sensor signal into a digital signal that the controller can understand. The CI801 module then transmits these digital signals to the controller via the PROFIBUS-DPV1 fieldbus.

Here are some examples of I/O modules that can be connected to the CI801 module:

AI801 Analog Input module: This module converts analog signals from sensors such as temperature sensors, pressure sensors, and flow sensors into digital signals.

AO801 Analog Output module: This module converts digital signals from the controller into analog signals that can be used to control actuators such as valves, motors and heaters.

DI801 Digital Input module: This module converts digital signals from sensors such as buttons, limit switches, and proximity sensors into digital signals.

DO801 Digital Output module: This module converts digital signals from the controller into digital signals that can be used to control actuators such as relays, solenos and contactors.

Once the CI801 module is connected to the I/O module, it can be used to configure the I/O module, monitor sensor signals and control actuators. The CI801 module can also be used to communicate with other devices on the PROFIBUS-DPV1 network, such as PLC, HMI and SCADA systems.

Here are some of the benefits of using the CI801 module:

Reduced installation and cabling costs: The CI801 module can be used to connect up to 12 I/O modules, reducing the amount of cabling and installation required.

Increased flexibility: The CI801 module can be used to connect various I/O modules, giving you more flexibility when designing your control system.

Increased reliability: The CI801 module is a robust and reliable device that can withstand harsh industrial environments.

Easy to use: The CI801 module is easy to configure and use, even for people with limited experience with PROFIBUS-DPV1.