ABB PFTL101A 1.0KN 3BSE004166R1全新现货DCS控制系统电源模块

ABB PFTL101A 1.0KN 3BSE004166R1全新现货DCS控制系统电源模块

PFTL101A 1.0KN 3BSE004166R1 COM端口3和4也由6300ESB I/O控制器集线器提供路由到VME P2连接器。并行IDE接口由Intel 6300ESB I/O控制器集线器提供。这个IDE接口支持两个通道：主通道和辅助通道。

第二信道车载路由至可选的CompactFlash插座。CI854 3BSE025349R1主信道被路由从VME P2背板连接器引出至RTM，RTM终止于标准接口40针接头。该通道可以支持主驱动器和从驱动器。

IDE接口在VMIVME-7807/VME-7807RC上，支持超ATA/33、超ATA/66和超ATAATA/100驱动并根据以下信息自动确定正确的操作模式：使用的驱动器类型。为了在Ultra ATA/100模式下正常工作必须使用特殊的80芯电缆代替标准的40芯电缆。

此电缆通常可从Ultra ATA/100驱动器制造商处获得。6300ESB I/O控制器集线器还提供串行ATA驱动器接口。这个串行ATA端口可以单独使用，也可以与并行IDE结合使用界面注：驱动器类型的选择（并行或串行），以及详细的IDE/ATA可在CMOS高级BIOS设置菜单中选择。

PFTL101A 1.0KN 3BSE004166R1 COM ports 3 and 4 are also routed to the VME P2 connector by the 6300ESB I/O controller hub. The parallel IDE interface is provided by the Intel 6300ESB I/O controller hub. The IDE interface supports two channels: primary and secondary.

The second channel is routed onboard to an optional CompactFlash socket. The CI854 3BSE025349R1 main channel is routed from the VME P2 backplane connector to the RTM, which terminates at the standard interface 40-pin connector. This channel can support both master and slave drives.

The IDE interface on the VMIVME-7807/VME-7807RC supports Super ATA/33, Super ATA/66, and Super ATAATA/100 drivers and automatically determines the correct mode of operation based on the following information: type of drive used. In order to work properly in Ultra ATA/100 mode, a special 80-core cable must be used instead of the standard 40-core cable.

This cable is usually available from the Ultra ATA/100 driver manufacturer. The 6300ESB I/O controller hub also provides a serial ATA driver interface. This serial ATA port can be used alone or in combination with a parallel IDE interface Note: The choice of drive type (parallel or serial), as well as the detailed IDE/ATA can be selected in the CMOS Advanced BIOS Settings menu