5069-IB16 直流 I/O 输入模块

5069-IB16 是 Allen-Bradley 的分立式输入模块。该模块是 Compact 5000 I/O 系列的一部分。该模块在 10-32VDC 的电压范围内工作，并提供十六 （16） 个灌电流输入通道，允许将信号设备集成到可编程自动化控制器 （PAC） 中。

5069-IB16 支持用作 CompactLogix 控制器的本地 I/O 模块，或作为分布式 I/O 组件，随 Compact 5000 以太网 I/P 通信适配器一起安装。无论模块使用何种，该模块的输入通道都会在最小电压下激活 voltage 电源为 10VDC，最大电压为 32VDC，标称额定值为 24VDC。同样，最小导通电流为 4 mA @ 10V，最大导通电流为 7.4 mA @ 32VDC，而标称输入电流为 6 mA @ 24VDC。

该模块DIN导轨安装。与该系列的任何其他模块类似，它配有DIN导轨闩锁以及顶部和底部互锁件，以确保与相邻模块的正确对齐。该模块与可拆卸接线端子 （RTB） 一起使用，用于输入信号的接线。该模块的兼容 RTB 包括 5069-RTB18-SPRING RTB 和 5069-RTB18-SCREW RTB。进行信号连接时，合适的电线尺寸为 0.5-1.5 mm2 （22-16 AWG） 实心或绞合屏蔽铜线，绝缘等级为 105 °C （221 °F） 或更高，最大直径（包括绝缘层）为 2.9 毫米（0.11 英寸）。使用弹簧型 RTB 时，建议每个端子只使用一 （1） 根电线。同样，当使用螺钉型 RTB 时，推荐的线径为 0.5-1.5 mm2 （22...16 AWG） 实心或绞合屏蔽铜线，绝缘等级为 105 °C （221 °F） 或更高，最大直径为 3.5 毫米（0.14 英寸），包括绝缘层。

该模块的输入电压范围为 10-32V DC。该模块的最大浪涌电流（MOD 功率）为 75 mA。该模块的直通电压（MOD 电源）为 18-32V DC。该模块的最大功耗为 3.9 W。该模块的最大散热为 13.3 BTU/小时。Allen-Bradley 5069-IB16 作为开放式设备提供。5069-IB16 适用于工业环境。当应用于 2 区环境时，该模块用于污染 2 环境（如 EN/IEC0664-1 中定义）。外壳只能通过设备访问。MOD 电源和 SA 电源请使用单独的外部电源。这可以防止仅使用一个时可能发生的不良后果。

5069-IB16 直流 I/O 输入模块

5069-IB16 is a separate input module for Allen-Bradley. The module is part of the Compact 5000 I/O series. The module operates in a voltage range of 10-32VDC and provides sixteen (16) feed current input channels, allowing the integration of signal devices into a programmable automation controller (PAC).

The 5069-IB16 supports a local I/O module as a CompactLogix controller or as a distributed I/O component installed with the Compact 5000 Ethernet I/P communication adapter. Regardless of which module is used, the input channel of the module is activated at the minimum voltage voltage of 10VDC, the maximum voltage of 32VDC, and the nominal rating of 24VDC. Similarly, the minimum conduction current is 4 mA@10V and the maximum conduction current is 7.4 mA@32VDC, while the nominal input current is 6 mA@24VDC.

The module is DIN rail mounted. Similar to any other module in the series, it comes with DIN rail latches and top and bottom interlocking pieces to ensure proper alignment with adjacent modules. This module is used with detachable terminal blocks (RTB) for wiring input signals. Compatible RTBS for this module include the 5069-RTB18-SPRING RTB and the 5069-RTB18-SCREW RTB. Suitable wire sizes for signal connections are 0.5-1.5 mm2 (22-16 AWG) solid or stranded shielded copper wire with an insulation class of 105 °C (221 °F) or higher and a maximum diameter (including insulation) of 2.9 mm (0.11 in). When using spring type RTB, it is recommended to use only one (1) wire per terminal. Similarly, when using screw type RTB, the recommended wire diameter is 0.5-1.5 mm2 (22... 16 AWG) Solid or stranded shielded copper wire with an insulation class of 105 °C (221 °F) or higher with a maximum diameter of 3.5 mm (0.14 in) including insulation.

The input voltage range of the module is 10-32V DC. The module has a maximum inrush current (MOD power) of 75 mA. The through voltage (MOD power supply) of the module is 18-32V DC. The maximum power consumption of the module is 3.9W. The module has a maximum heat dissipation of 13.3 BTU/ hour. Allen-Bradley 5069-IB16 is available as an open device. The 5069-IB16 is suitable for industrial environments. When applied to a zone 2 environment, the module is used to pollute a zone 2 environment (as defined in EN/IEC0664-1). The shell can only be accessed through the device. Use separate external power supplies for MOD power supplies and SA power supplies. This prevents undesirable consequences that can occur when only one is used.