2711P-T15C4D8 人机界面(HMI)设备

目录号2711P-T15C4D8的PanelView Plus 6操作终端是Allen-Bradley制造的可视化硬件。该操作终端具体属于PanelView Plus 61500子类别。

2711P-T15C4D8通常被称为人机界面(HMI)设备。通过模拟电阻触摸屏与驱动寿命100万台印刷机。这个触摸界面允许交互和启动注释，而不需要使用HMI键盘。

15英寸屏幕，分辨率为1024 x 768, 18位彩色图形，有效观看面积为304 x 228毫米(12.0 x 9.0英寸)。该屏幕配有可现场更换的背光，在25°C(77°F)下的预期寿命为50,000小时。

2711P-T15C4D8设计用于标识为I类，2类，A, B, C和D组，II类，2类，F和G组以及III类危险场所的安装。该操作终端平装在具有NEMA/UL类型12,13,4x(仅限室内使用)和IEC IP54, IP65额定外壳的外壳上。创建一个尺寸为154 (6.08)H × 220 (8.67) W的面板切口。

用户可以通过触摸屏控制操作界面输入信息和数据。本设备使用18至32伏直流电源输入供电。该2711P-T15C4D8单元具有512 MB RAM和512 MB非易失性内部存储器。这个单元的大概运输重量和尺寸是13磅和20 x 14 x 8英寸。

该操作终端有一个以太网端口，可以连接到以太网/IP网络上的控制器。该端口也可以用于应用程序传输和打印。以太网/IP屏幕显示并允许用户修改PanelView终端的一些以太网/IP通信设置。

2711P-T15C4D8 人机界面(HMI)设备

The PanelView Plus 6 operating terminal, catalog number 2711P-T15C4D8, is a visualization hardware manufactured by Allen-Bradley. The operation terminal belongs to the PanelView Plus 61500 subcategory.

The 2711P-T15C4D8 is often referred to as a Human Machine interface (HMI) device. By simulating resistance touch screen presses with drive life of 1 million units. This touch interface allows interaction and launching annotations without the need to use an HMI keyboard.

The 15-inch screen has a resolution of 1024 x 768, 18-bit color graphics and an effective viewing area of 304 x 228 mm (12.0 x 9.0 inches). The screen has a field replaceable backlight and a life expectancy of 50,000 hours at 25°C(77°F).

2711P-T15C4D8 is designed for installation of hazardous sites identified as Class I, Class 2, A, B, C and D, Class II, Class 2, F and G, and Class III. The operating terminal is flat-mounted on a housing with NEMA/UL type 12,13,4x(for indoor use only) and IEC IP54, IP65 rated housing. Create a panel notch with dimensions 154 (6.08)H x 220 (8.67) W.

Users can input information and data through the touch screen control operation interface. This unit uses 18 to 32 volts DC power input. The 2711P-T15C4D8 unit has 512 MB of RAM and 512 MB of non-volatile internal memory. The approximate shipping weight and dimensions of this unit are 13 pounds and 20 x 14 x 8 inches.

The operating terminal has an Ethernet port and can be connected to the controller on the Ethernet /IP network. This port can also be used for application transfer and printing. The Ethernet /IP screen displays and allows the user to modify some Ethernet /IP communication Settings for the PanelView terminal.