2198-P208 是一款 Kinetix 5700 直流总线电源

Allen-Bradley 2198-P208 是用于 Kinetix 5700 伺服驱动器的直流总线电源。它具有三相 324 - 528V（标称 480V）RMS（均方根）交流输入电压，频率为 47 - 63 Hz。它的模块宽度为85mm。它具有 73.1 A 的主交流输入电流、33A 的最大浪涌（0 峰值）电流和 219.2A 的峰值交流输入电流。总线的连续和峰值输出电流分别为 69.2A 和 207.6A。总线的连续输出功率和峰值输出功率分别为 46 kW 和 138 kW。它的内部分流电阻和分流功率分别为 13.5 欧姆和 200W。它具有 99% 的效率，内部电容为 2050 μF，容性能量吸收为 453 J。

2198-P208 电源具有创新的卡扣式系统，无需工具，可以轻松组装和安装在驱动器中。它重 15.5 磅，尺寸为 9.29 x 3.35 x 17.04 英寸。单个 Kinetix 5700 驱动器最多可支持 3 个电源模块。可以安装额外的电源模块，以增加驱动器的单轴和双轴逆变器的功率输出。

2198-P208 具有简单、强大和紧凑的设计，适用于需要大轴数和高功率的机器。该变频器具有集成的运动和安全功能，可通过 EtherNet/IP 网络工作，便于在大型机器中使用。凭借其高性能的电机控制和更短的集成时间，它适用于各种行业，如饮料、尿布机、制袋机、轮胎成型机、托盘装载机等.

2198-P208 通过提供 324-528Vrms 的交流输入电压范围、三相运行，并提供 46kW 的连续输出功率和 69.2 安培的连续输出电流。为符合 IEC（非 UL/CSA）电路保护规范，2198-P208 可安装 110 Ampere DIN gG 保险丝、140MG-H8E-D10 Allen-Bradley 电机保护断路器或 140G-G6C3-D12 塑壳断路器。对于 UL/CSA 电路保护规范，合适的保险丝是 Bussman 品牌，目录号为 LPJ-100SP （100A） 和塑壳断路器 140G-G6C3-D12。

直流母线电源设计用于在 0-50 °C （32-122 °F） 的温度范围内工作。对于本设备的存储，环境温度必须为 -40- +70 °C （-40- +158 °F）。该器件具有 200,000 A rms 的短路电流额定值对称固态电路保护。

2198-P208 直流总线电源模块带有两 （2） 个离散输入和两 （2） 个以太网通信接口。该设备支持零堆叠，并配有七 （7） 段显示屏，可为驱动器的重要参数和配置菜单提供反馈。

2198-P208 是一款 Kinetix 5700 直流总线电源

Allen-Bradley 2198-P208 is a DC bus power supply for Kinetix 5700 servo drives. It has a three-phase 324-528V (nominal 480V) RMS (root mean square) AC input voltage with a frequency of 47-63 Hz. Its module width is 85mm. It has A 73.1 A main AC input current, 33A maximum surge (0 peak) current, and 219.2A peak AC input current. The continuous and peak output currents of the bus are 69.2A and 207.6A, respectively. The continuous and peak output power of the bus is 46 kW and 138 kW respectively. Its internal shunt resistance and shunt power are 13.5 ohms and 200W, respectively. It has 99% efficiency, an internal capacitance of 2050 μF, and a capacity of 453 J of energy absorption.

The 2198-P208 power supply features an innovative snap-on system that requires no tools and can be easily assembled and installed in the drive. It weighs 15.5 pounds and measures 9.29 x 3.35 x 17.04 inches. A single Kinetix 5700 drive can support up to 3 power modules. Additional power modules can be installed to increase the power output of the driver's single-axis and dual-axis inverters.

The 2198-P208 has a simple, powerful and compact design for machines requiring a large number of shafts and high power. The inverter has integrated motion and safety functions and works over EtherNet/IP networks, making it easy to use in large machines. With its high performance motor control and shorter integration time, it is suitable for a variety of industries such as beverages, diaper machines, bag making machines, tire forming machines, pallet loaders, etc.

The 2198-P208 operates in three phase by providing a 324-528 VRMS AC input voltage range, and provides a continuous output power of 46kW and a continuous output current of 69.2 amps. To comply with IEC (non-UL /CSA) circuit protection specifications, the 2198-P208 can be fitted with a 110 Ampere DIN gG fuse, 140MG-H8E-D10 Allen-Bradley motor protection circuit breaker or 140G-G6C3-D12 mould-case circuit breaker. For UL/CSA circuit protection specifications, suitable fuses are Bussman brand, catalog number LPJ-100SP (100A) and mould-case circuit breaker 140G-G6C3-D12.

The DC bus power supply is designed to operate in a temperature range of 0-50 °C (32-122 °F). For storage of this device, the ambient temperature must be -40- +70 °C (-40- +158 °F). The device has 200,000 A rms short-circuit current rating symmetric solid-state circuit protection.

The 2198-P208 DC Bus power module has two (2) discrete inputs and two (2) Ethernet communication interfaces. The device supports zero stacking and features a seven (7) segment display that provides feedback on the drive's important parameters and configuration menus.